Dual-channel dispenser liquid DOZA-2V. Bottling line.
Offer type: salePublished: 19.06.2018
| Price: | 6 000 UAH |
| Seller: |  Slobodchuk Anton Yur'evich |
| Phones: |  0680878821 Show phone |
| Address: | Ukraine, Kharkivs'ka Oblast', Kharkiv |
Your attention is invited to the two-channel controller for dispensing water of different liquids.
Mode of operation: SEMI-automatic. Ie asked for each channel dose. Press START (red button). After the dosage, the controller waits for the next START is pressed, while the set dose is stored as the indicators, and in memory of the device (very handy when you turn on the device in the network 220 and the display lights up you used last dose).
Control of the valve with coil 220V. You can parallel the valve to connect the pump with power up to 500 watts.
The kit includes only the controller of the dispenser. Addition we offer plastic counter - 250 UAH. Brass counter 550 UAH.
It is possible to connect multiple pedals (pedal or button) dispensing a predetermined displacement (+350grn to cost).
If the presence does not prove - that the production time of 2 days.
It is possible to change the functionality of the dispenser to fit your needs!
Video of similar, but single-channel dispenser:
https://www.youtube.com/watch?v=gZvWVNeb5cY&t
Also developing industrial electronics for your requirements.
You have a great day!
Mainly it is used on the bottling lines of water, milk, oil, antifreeze and cleaning fluids.
A high quality controller.
Power supply 220V.
Dosage of liquids in the range from 0.01 to 99,99 liters. The dosing accuracy depends on the chosen pulse counters and can be in the range of 0,2...20 ml.
A high quality controller.
Power supply 220V.
Dosage of liquids in the range from 0.01 to 99,99 liters. The dosing accuracy depends on the chosen pulse counters and can be in the range of 0,2...20 ml.
There is an opportunity for each dosing channel to configure (calibrate) the number of pulses per litre of liquid.
Mode of operation: SEMI-automatic. Ie asked for each channel dose. Press START (red button). After the dosage, the controller waits for the next START is pressed, while the set dose is stored as the indicators, and in memory of the device (very handy when you turn on the device in the network 220 and the display lights up you used last dose).
Control of the valve with coil 220V. You can parallel the valve to connect the pump with power up to 500 watts.
Present sound signaling the start of loading and completion.
The kit includes only the controller of the dispenser. Addition we offer plastic counter - 250 UAH. Brass counter 550 UAH.
It is possible to connect multiple pedals (pedal or button) dispensing a predetermined displacement (+350grn to cost).
If the presence does not prove - that the production time of 2 days.
It is possible to change the functionality of the dispenser to fit your needs!
Video of similar, but single-channel dispenser:
https://www.youtube.com/watch?v=gZvWVNeb5cY&t
Also developing industrial electronics for your requirements.
You have a great day!
