Valve PIC 125-0.4
Offer type: salePublished: 21.06.2019
| Price: | negotiated |
| Seller: |  Gres' Denis |
| Phones: |  380992530472 Show phone |
| Address: | Ukraine, Khersons'ka Oblast' |
apan ПИК125-0,4 UM
the most common valve.
Most often used in piston compressors for compressing various gases,
with lubrication and without lubrication of the cylinders, the rotation speed of the crankshaft which is up to 1000 rpm./min.
Case flow valve ПИК125-0,4 UM made of aluminum, brass or steel,
depending on the future working environment of the valve.
Design valve ПИК125-0,4 UM simple, it is assembled from the seats and plates connected
pressed on special rings. The plates are made of special
high quality stainless spring steel.
The gas flow passing through the valve ПИК125-0,4 UM practically does not change direction,
and the big bore section valve ПИК125-0,4 UM ensure minimum loss of
pressure and power.
When using valve ПИК125-0,4 UM energy savings of 5 to 12 percent, decreases the temperature of the compressed gas, the compressor capacity increases to 6-10 percent. Valve ПИК125-0,4 UM runs almost silently.
Most often used in piston compressors for compressing various gases,
with lubrication and without lubrication of the cylinders, the rotation speed of the crankshaft which is up to 1000 rpm./min.
Case flow valve ПИК125-0,4 UM made of aluminum, brass or steel,
depending on the future working environment of the valve.
Design valve ПИК125-0,4 UM simple, it is assembled from the seats and plates connected
pressed on special rings. The plates are made of special
high quality stainless spring steel.
The gas flow passing through the valve ПИК125-0,4 UM practically does not change direction,
and the big bore section valve ПИК125-0,4 UM ensure minimum loss of
pressure and power.
When using valve ПИК125-0,4 UM energy savings of 5 to 12 percent, decreases the temperature of the compressed gas, the compressor capacity increases to 6-10 percent. Valve ПИК125-0,4 UM runs almost silently.
