Holzstar HBS 261-2 band saw machine for wood saw blade jig saw holzstar SHBS 261 2

261-2 Holzstar HBS (SHBS holzstar 321 2) Tape wood saw is designed for cutting workpieces of hard and soft wood, various types of slabs of wood: MDF, chipboard, OSB sheets, various plastics. With proper selection of a blade, this tape wood saw capable of cutting thin blanks of non-ferrous metals, aluminum and Plexiglas.

Vertical band saw Holzstar HBS 261-2 tree belongs to small woodworking machines Amateur groups and is optimal for the home worker or a textbook in educational institutions, but due to the robust design and functional qualities, saw quite suitable for use in production facilities.

The saw blade bandsaw wood Holzstar HBS 261-2 made in the form of a loop stretched over the drive pulleys. The pulleys are made of aluminum and have a protective coating on the working surfaces, preventing damage to the saw blade.
High quality cutting is ensured by the guides that hold the blade, to prevent any displacement or distortion of the cut line. Design guide node includes pillow block bearings, located above the Desk and under it. The adjustment of the gap between the blade and bearings controls the range of oscillation of the saw blade determines the quality and the accuracy of the cut.
Desk band saw blades for wood Holzstar HBS 261-2 made of gray cast iron and has a polished surface, allowing smooth feeding of the workpiece into the cutting area. To carry out the cut on the sloping Desk equipped with a mechanism for tilt up to 45°. To install angular emphasis on the desktop provided a T-shaped groove. Combining the setting of the tilt table and the position of the angle stop, it is possible to detail the necessary configuration.
The rip fence, equipped with a lens over dial and quick-locking handle, allows you to fine tune the saw for rip cutting of workpieces. Thus, the band saw Holzstar HBS 261-2 tree enables high-quality longitudinal and angular cuts, and in the presence of special devices and radial cuts.
The treatment area is illuminated by a built-in machine lamp.

Specifications Holzstar HBS 261-2:

• Cutting range
• Max. cutting height 90 ° to 152 mm
• Max. cutting height 45 ° 95 mm
• Max. cutting width with an emphasis 145 mm
• Max. cutting width without stop 245 mm
• The size and weight of the machine
• Length 680 mm
• Width / depth 520 mm
• Height 1435 mm
• Approx. weight 34 kg
• Electrical Data
• Power delivery 0,22 kW
• Supply voltage 230 V
• Phase (s) 1 Ph
• Current type AC
• Mains frequency 50 Hz
• The diameter of the exhaust hole 100 mm

• The saw blade
• Speed (C) 400/800 m / min
• Length 1826 mm
• Width 10.0 mm
• The strength 0.35 mm
• Desk
• Length 360 mm
• Width 320 mm
• Height 935 mm
• Turn 0 - 45 °
• VPE 1

The package Holzstar HBS 261-2:

• Band saw.
• Rip fence with lens.
• Guide rip fence.
• Corner stop.
• Lamp.
• Stand outdoor.

All machines have a warranty period of 1 year, provide services for warranty and post-warranty service

Go to the section sawing machines for wood