Gate valves gate ZUBI under the hopper and silo

Sliding gate ZUBI type 400 for installation under the hopper and silo as a dosing device for packaging cement, dry building mixes,grain and other bulk products. The gate valves wafer type 400, with the direction of the fluid flow in one direction (unidirectional), specially designed for installation under the silos, bunkers as dosing units. Gate valves gate ZUBI type 400 is made as a sliding stem and non-rising stem. As gate valves type 400 can be equipped with a cover to prevent the release of gases into the atmosphere, through the seal knife. The case has a one-piece integral cast structure. Inside the housing perpendicular to the hole of the orifice is set knife (Schieber, guillotine), which is moved by the actuator blocking or opening the passage. To control the gate valves type 400 used several types of actuators: the wheel chain management the lever reducer the actuator the drive the hydraulic We recommend you to use slide gate ZUBI type 400 under the bins and transporting pipelines: dry poroshkoobraznye environment which move in an inclined or vertical pipeline under the force of its own gravity-gravity, Samosata. For example: grain, flour, sawdust, industrial and coal dust, soot, ash, cement, building dry powder mixture, pilety waste from various industries, polyethylene and polypropylene chips and more. As well as airborne dust mixture in pneumatic pipelines. water, juices, wine, spirits, sewage urban, industrial discharges from non-aggressive to the material parts of the valve, sludge, cement and mortars, fats, oil, oil, oil and more.