Multifunctional machine for wood Zenitech MF C

Combined manyoperational the lathe is a woodworking installation, made in a rugged and equipped with three electric motors with total capacity of 3000 watts.

Three main breaker complete with minimum voltage coil, 2 three-way switch 2 switch 4 switch.

Designed for wood blanks: planing along the guide rod, planing in size by the thickness of the longitudinal and transverse sawing, several drilling and milling operatsyyu, it is also possible the execution of complex of works on the selection of slots, studs, rebating, choice of quarters, etc.

For longitudinal sawing is used dural table with the carriage stop, angle of rotation which is 0-45 degrees in both directions.

Three engines.

Cutting disc with tilt function.

Function scoring drive.

PLANING:

• Motor power W 2000
• The size of the table for planing mm 1285x310
• The size of the table for planing thickness mm 600x310
• The diameter of the cutting head 75 mm
• The diameter of the supply block 32 mm
• The number of knives 3 PCs
• The tilt angle from 0° to 45°
• The diameter of the drawer to collect dust and waste 100 mm
• Max.planing width 310 mm
• Max.cutting depth mm 5
• Max.height planing thickness 180 mm
• The speed of the cutting head rpm 4000
• The feed speed m/min 8

SLOTTING:

• The size of the tool chiselling 16 mm
• Table size mm 161 x 368
• Move vertically, 80 mm.
  
• Turn on horizontal 85 mm
• Table motion (up/down) 140 mm

SAWING:

• The engine W 3000
• The size of the cutting disc mm 250x30x3,2x2,2xT
• The size of the scoring disk 80 mmx20x3,2x2,2x8T
• The speed of the cutting disc rpm 4050
• Speed scoring drive rpm 6300
• Max. the cutting height of 65 mm
• The cutting height for blade 45° 45 mm
• The size of the sliding table 1500 mmx240
• The diameter of the drawer to collect dust and waste 100 mm
• Move the sliding table mm 1700

THE PARAMETERS OF THE SPINDLE:

• The engine W 3000
• Spindle speed rpm 3500/5500/7000
• Spindle diameter 30 mm
• Movement of spindle 130 mm
• Max. the cutting diameter mm 140
• Max.the cutting height mm 105
• The diameter of the drawer to collect dust and waste 100 mm
• Weight net/gross kg 440/550
• Package dimensions mm 1590x1120x1010

On all machines uRostranitsa warranty 1 year, provide services for warranty and post-warranty service.