Transformer substation KTPB ,2KTPB in reinforced concrete shell

Substation transformer complete block in the concrete shell type case, 2KTPB represent one - and two-transformer substation for outdoor installation and used for receiving electric power, the AC frequency 50 Hz voltage 6(10) kV, its transit and conversion into electrical energy voltage of 0.4 kV for power supply of consumers of cities, settlements, industrial or agricultural facilities. Normal operation of the substations is provided under the following conditions: - altitude not exceeding 1000 m; - range of operating ambient temperature from -60 °C to + 40 °C; - wind speed up to 36 m/s (wind up to 800 PA). Upon customer's request can be made substation change the design, technical parameters and list of used equipment that is specified in the additional requirements when ordering substation. On request it is possible to manufacture 2KTPB with automatic input (ATS): Power 2KTPB from 63 to 400 kV-inclusive - ATS on the side of LV or HV Power 2KTPB from 63 to 1250 kV-inclusive - ATS on the HV side.. Assembly equipment Shneider Electric, For an order, you must submit the questionnaire. The types of substations : MITS - 250/6/0,4-03-U1 ; BCTP - 250/10/0,4-03-U1 ; MITS - 400/6/0,4-03-U1 ;BCTP - 400/10/0,4-03-U1 ; MITS - 630/6/0,4-03-U1 ;BCTP - 630/10/0,4-03-U1 ;MITS - 1000/6/0,4-03-U1 ; BCTP - 1000/10/0,4-03-U1 ; BCTP - 1600/6/0,4-03-U1 ; BCTP - 1600/10/0,4-03-U1 ; BCTP - 1600/10/0,4-03-U1; BCTP - 1600/10/0,4-03-U1 . Details (495) 720-70-42; 903-720-70-42 http://www.electromarcet.ru Electromarket (495) 720-70-42 ; 903-720-70-42 http://www.electromarcet.ru Electromarket