Hydraulic guillotine Model DM-HMV CNC

Series DM-HMV CNC, which manages 3 coordinates: move the rear stop, adjustable angle blades and blade gap. The series is called DM-HMV CNC . Used CNC Cybelec DNC 60 or ESA 525. More expensive series DM-HMV CNC is offered if the customer plans to cut on the same machine, and thin and thick plates, and of different materials (ordinary steel, stainless steel, mild steel, titanium, etc.,) Standard: • CNC Cybelec DNC 60 (3 managed coordinates: move the rear stop, angle blades, the blade gap); • rear focusing on the screw-nut rolling 1000 mm; • cut the frame - 350 mm;tank capacity hydraulic system - 200-550 l; • the number of hydraulic hold-down device of a sheet - from 15 to 37 PCs; • customize the width of the cut;the illumination of the cutting line; • feed the sheet to smooth the guide blocks of the machine table; • knives of the machine: top with 2 cutting edges, the lower knife with 4 cutting edges; • adjustment of the angle of the knives from the CNC; • adjustment of the clearance between the knives from the CNC;the front fence security for the operator's hands; • back safe working lamp rear stop; • T-shaped guide sheet on the left side of table (1 m) and 2 front rails of the sheet (1 m). Optional extras: • support system cut off parts of the sheet from the back side of the machine; • the device for cutting at an angle; • T-shaped guide sheet on the left side of the machine table + front rails of the table length 2 and 3 m. http://www.stankom.com/kuznechno-pressovoe-oborudovanie/nozhnitsy-guillotine/gidravlicheskie-nozhnitsi/dener_makina_dm_hmv_cnc/ -detailed specifications here