Hydraulic press brake with CNC Model SMART
Offer type: salePublished: 28.02.2015
| Price: | negotiated |
| Company: | OOO 'SP' Stan-Komplekt |
| Seller: |  Vladimir Agapov |
| Phones: |  +38(093)612-08-05 Show phone |
| Address: | Ukraine, Kyiv |
Standard:
• CNC ESA 530 (LCD display with simple graphics and data work programme m), PN citizenbane.
• Provides control of the axes Y1, Y2 (cylinders bending beam), X - move C and the last stop of the machine.
• Accurate positioning of the axes Y1, Y2 = 0.01 mm, along the axis of the rear stop X = 0.1 mm (rear focusing on ball screw).
• Mounting system of punches Amada - PROMECAM.
• Mounting system matrices adjustment screws, the direction of the side bars.
• Wedge compensator deflection table: adjustment manual crank sensor.
• Two floating front guides hundred-La to support the sheet.
• Two hard block of back support, height-adjustable manually (move on the vertical axis R = 150 mm).
• Side rails of the working area and to protect the working area from the back side (solar cells).
Optional extras:
• The ability to set the compensation of the deflection of the table with remote control (instead of a mechanical adjustment handle);
• 2-controlled CNC axes move the rear stop (X - R, i.e., not only horizontally, but also vertically);
• move the rear stop 1000 mm on the X-axis instead of the standard 650 mm;
• additional front guides, additional thrust blocks back support;
• front rails of the support sheet, sliding along the linear guide;
• various combinations of increasing the stroke of the rear stop (750-1000 mm), if the rear stop 2 managed coordinates (X, R).
http://www.stankom.com/kuznechno-pressovoe-oborudovanie/listogibi/dener/SMART/ -detailed specifications here.
