Sell welding machine PDG-200
Offer type: salePublished: 28.02.2015
| Price: | 6 099 UAH |
| Seller: |  Kravchenko Vadim |
| Phones: |  0959129304 Show phone |
| Address: | Ukraine |
Sell welding machine PDG-200
Welding machine inverter PDG-200 is designed for semiautomatic welding with direct current consumable electrode wire in a carbon dioxide environment (MIG/MAG), as well as for manual arc welding with coated electrodes (MMA) products from low-carbon and low-alloy steel.
Specifications:
- Supply voltage: 1x220
- Power supply frequency, Hz: 50
- Rated welding current at cycle length PN=60% and cycle 5 min, A,: 160
- Qty of rollers, pieces: 2
- The limits of regulation of the wire feed speed, m/h: 40 - 700
- Open circuit voltage-mode:
* in MMA mode not more than, Q: 80
* MIG/MАG no more At: 50
Range of welding current control mode:
* MMA mode, And: 20-160
* MIG/MАG not exceed: 20-160
- Adjustment range voltage mode:
* in MMA mode no more In: 20,8 - 26,4
* MIG/MАG no more In: 15 - 22
View specifications mode:
* in MMA mode: falling
* MIG/MАG: hard
- Power consumption, not more, kVA: 6,3
- Efficiency: 0,95
- Capacity cartridge for welding wire, kg: 5
- Diameter of wire, mm (MIG/MАG): 0,8 - 1,0
The electrode diameter, mm (in MMA mode): 2 - 4
- Connector type burners: eurorate
- Management of gas supply: electroneurography
- Adjustment of welding voltage, welding current, feeding speed: stepless
- Cooling: forced air
- Power supply voltage (power) of the welding wire feeding motor: 24 V, (35 watts)
- Weight not over (without coil with wire): 16
Overall dimensions, mm: HH
