Vertical drilling machine model S

Vertical drilling machine model S, 1990.in., in good working condition. Designed for perform the following operations: drilling, tankowanie, reaming, boring, tapping into various kinds of metal and non-metallic parts of HSS and carbide tool. On the machine S there is a site that allows you to control the depth of drilling. The presence of folding table allows you to process on the machine parts of large dimensions. Desk is equipped with a height adjustable mechanism. Electrical equipment built into the column. Cast iron body parts of the machine S provide high rigidity. Vertical drilling machine allows you to use S various devices and tools that extend its technological opportunities. Machine 2C132 can be used in small-scale production, small businesses, repair shops.

The range of drilling in steel, 3-32 mm (50)**

The range of cut thread M3-M33

The size of the table working surface, mm 500x500

The number of T-slots 3

The width of the guide groove N

Maximum distance from spindle nose to table mm 750

The rise of a table, mm 300

Distance from spindle axis to column, 300 mm

Spindle taper Morse 4 (5)*

Quill travel spindle, mm 250

Number of spindle speeds 12 (15)*

The range of rotation of the spindle, rpm 31,5...1400 (2000, 4000)*

Torque, not more than 400 Nm

The axial force on the spindle, no more, N 15000

The number of mechanical quill feed spindle 9

The range of mechanical quill feed spindle, mm/Rev 0,1; 0,14; 0,2; 0,28; 0,4; 0,56; 0,8; 1,12; 1,6

The engine main motion kW 4

Installation moving the drill head, 170 mm

Maximum weight of workpiece (kg) 600

The maximum height of workpiece, mm 600

Weight , kg 1200

Overall dimensions, mm 870x1110x2700

* option

** at the minimum feed rate and rpm