The machine is a vertically-sterlilng S.

Vertical drilling machine model S, 1990.in., in good working condition. Gr. checking and loading. Designed to perform the following types of work: drilling, tankowanie, reaming, boring, tapping into various types of metallic and non-metallic parts of HSS and carbide tool. The machine S there is a site that allows you to control the depth of drilling. A folding table allows you to process on the machine parts of large dimensions. Desk is equipped with a height adjustable mechanism. Electrical equipment is built into the column. Cast iron body parts of the machine S provide high rigidity. Vertical drilling machine S allows you to use different tools and instruments that enhance its technological capabilities. Machine 2C132 can be used in small-scale production, small enterprises, in repair shops. The range of drilling in steel, 3-32 mm (50)** The range of cut thread M3-M33 The size of the table working surface, mm 500x500 The number of T-slots 3 The width of the guide groove N Maximum distance from spindle nose to table mm 750 The rise of a table, mm 300 Distance from spindle axis to column, 300 mm Spindle taper Morse 4 (5)* Quill travel spindle, mm 250 Number of spindle speeds 12 (15)* The range of rotation of the spindle, rpm 31,5...1400 (2000, 4000)* Torque, not more than 400 Nm The axial force on the spindle, no more, N 15000 The number of mechanical quill feed spindle 9 The range of mechanical quill feed spindle, mm/Rev. 0,1; 0,14; 0,2; 0,28; 0,4; 0,56; 0,8; 1,12; 1,6 The engine main motion kW 4 Installation moving the drill head, 170 mm Maximum weight of workpiece (kg) 600 The maximum height of workpiece, mm 600 Weight , kg 1200 Overall dimensions, mm 870x1110x2700 * option ** at the minimum feed rate and rpm