Reinforced concrete forms. Metal moulds concrete. Built-in steaming and vibration compaction.

VIBRO-THERMO STANDS AND THERMOELECTRICITY FOR THE PRODUCTION OF CONCRETE.

- don't need a huge production area of production can be established without workshop on open area);
- don't need the vibrating table (system vibration compaction of the concrete mix. The system is not in termoelektrarna its crane on the vibrating table);
- don't need the steam chamber, the steam pit steam generators (and highly reliable integrated steaming);
- does not require a large staff.

Range:

1) Universal moulding vibro-thermo stand/termoelektrarna for the production of aerodrome slabs PAG-18/14 (it gives an opportunity to produce as PAG-18, and PAG-14);
2) Molding the vibration thermo stand/termoelektrarna for the production of the slabs of various sizes;
3) Pornofotky vibro-thermo stand/termoelektrarna for the production of hollow core floor slabs with Autonomous hole-forming cores. Punches pulled on dry concrete. Size up to 9 meters. Up to 12 meters - special order. Adjust the length of the manufactured plates;
4 Molding vibro-thermo stand/termoelektrarna piles;
5) Others as per customer's drawings.

Each vibro-thermo stand includes:

-own system vibration compaction of concrete (not in termoelektrarna);
-built-in steaming (patented design);
-design pre-tensioning reinforcement and reinforcing ropes series K7, diameter 9 and 12mm ( 2 options additional reinforcement - per GOST or TU Your choice. It is used as a classic - electrothermal method prenotazione or hydraulic);
- a set of Autonomous hole-forming cores (patented design). Punches pulled on dry concrete. (regarding the production of hollow core floor slabs);
-the Registrar.

Steaming takes from 6 to 10 hours, depending on ambient temperature.
The performance of a single vibration thermo stand/termoelektrarna: 2 moulding in the day, with the selling strength of concrete 60%-70%.

We export in the near and far abroad.