Shredder wood,derivatively Fermi 260HFC c manipulator 4067

Model FARMI 260HFС (model with metal feed conveyor) is a high-performance crusher wood waste for processing into chips different materials (high quality fuel chips from trunks, entire trees, logs, waste of sawmills, and so on)

- Mon INoe electro-hydraulic device feed with two rollers: top roller of large diameter (D=280 mm), well thoughtful tray material, the size of the window to load material 260 x 320 mm

- Dual crusher FARMI with the three-step crushing system material: Cutting knives - Extra knife - Grinder branches

- Adjustable size chips from 7 to 25 mm (at special conditions up to 4 mm)

- Restrictions on the minimum diameter crushed material is not present (the gap between the knives 1.5 mm)

- Own hydraulic system, which results in action as the feeder and the feed roller

- Aboutotsutstvie mechanical stresses (device control rotation NO STRESS)

                  

Technical characteristicsand FARMI 260 HFWith

Proizvoditelnost, m3/h

10-40*

Max. the size of the wood / holes feed, mm

260 / 260x320

The length of the chip output, mm

(4) 7 - 25

Recommended power, kW

90 - 125*

The rotor diameter, mm / knives, pieces

1050 / 2

The speed of rotation of the shaft power, rpm

540-1000

Standard exhaust pipe,the height from the floor (option), m

(2.4) 3.0 (3.5)

Submission

Conveyor boot device

The rotor mass, kg

240

Tractor connection

Three-point hitch /feeder

Shredder branches

There

Weight shredder,kg

1500

*Performance and power consumption of the shredder can vary depending on the processed material, the condition of the knife, the length of the chip, the type of feed and speed.

 

Separabile equipped with their own oil station to ensure operation of the hydraulic system. In addition, a chipping machine is equipped with a system NO STRESS, tracking speed the rotation of the engine of the tractor, and when they fall disable the presentation of the material in machine. When restoring speed - flow automatically resumes. This the option provides the following benefits:

· uniformity chips

· avoidance of unnecessary stop tractor engine

· higher performance

· the possibility of using a tractor with a less powerful engine

This cheap logger meets all requirements of the forestry and agricultural sectors. Ideal for loading lumber from wood waste to products clearcuts, and can also be used as universal loader to perform various material handling operations.

- Slewing device with 4 cylinders (2 rails), provides high torque.

- The truck has a sufficient departure boom and lifting force.

Corner hinge with a wide the range of rotation enables excellent working geometry

- Drop support and 3-point hitch as standard equipment

 

 

 

TECHNICAL DANNAE. LOGGER FARMI 4067

                                                                      

General lifting moment, kNm

39,0

Max. departure, m

6,7

Load capacity, kg / 4 m

705

Load capacity, kg / max reach

445

Turning point, kNm

10

The mass of the hydraulic supports, kg

200

Weight(with grapple and swing mechanism) kg

870

Featured performance pump, l/min

30-60

Join to the tractor

Trehtona hitch

Working pressure, bar

180

Control valve

LEC 2/6 +2 incl.-off.

 

To meet the stated passport data on performance, capacity and speed separabile complex real work indicators ,the capacity of the used tractor should not be less than 125 HP