Crossflow evaporative fluid cooler Marley MH Fluid Cooler
| Price: | negotiated |
| Company: | Aerfors |
| Seller: |  Mihal'chuk Tat'yana |
| Phones: |  +38 0562 333 718 Show phone |
| Address: | Dnipropetrovska Oblast', Dnipropetrovsk, Ukraine |
Because of hybrid cross design and light scope of service evaporative coolers Marley MH fluid are the most effective on the market. Thanks to conservation work fluid in a clean, closed loop and combine cooling tower and heat exchanger in one system evaporative coolers Marley MH fluid technology CoolBoost™ provides unsurpassed performance and comfort service.
Technology CoolBoost. In the Marley MH fluid cooler is used mechanical technology cross-flow forced draft and application irrigation material located above the coil.
The process ColdBoost
1. The working fluid passes through the coil.
2. Recirculation the water is cooled by passing through the sprinklers. The water temperature is aligned and sprayed on the outer surface of the coil.
3. Small part of the recirculating water evaporates from the air passing through the coil and fill that cools the working fluid.
4. The coil gives off heat by evaporation in a stream of outside air pre the cooled recirculation spray water.
5. Recirculation the water flows from the coil in the water pools and again pumped up for spray irrigation material.
Advantages
§ Prevents contamination of the working fluid.
§ Improves system efficiency, reduces wear and the formation of scale.
§ Reduces energy costs and maintenance system.
§ Saves valuable space in the technical hardware.
Provides reliable and effective functioning all year round.
