Parka HRP-2

Product "Parka liter working with a falling load model" is intended to define the nature of the grain (grain weight per liter).
The program and method of certification No. 866-36-09; calibration Method No. 867-36-09
Product "Parka liter working with a falling load model" is intended to define the nature of the grain (grain weight per liter).
Used in laboratories serebryannyh, processing enterprises, research organizations and other
Parka consists of the following main units:
Table (used as a basis when assembling Porky to work);
Measurement (Is a cylindrical Cup having a bottom center of the hole. In the upper part of the measurements has a slot for a knife. Measurement is installed in the flange table);
Filler (Filler made in the form of a hollow cylinder having grooves at the ends. This allows tightly to install the filler on the measure);
Cylinder filling (Cylinder filling is installed on the filler. The cylinder has piled at one end of the cut out window. Here inside the cylinder is mounted a funnel with flap and lock)
Drop weight (drop weight is made in the form of a cylinder with a circular recess);
Knife (the Knife is made from stainless steel sheet has a cutout in the form of a right angle).
If you drop weight is at the bottom of measurements, and the knife vdvinul in the crack measurements, volume measurements between the upper cargo plane and the bottom plane of the knife strictly equal to one litre.
Specifications:
Name of indicator
The value of the index
The inaccuracy, g, not more
± 4
The variation of the six dimensions, g, not more
2,10
Overall dimensions, mm
in working condition
240x240x720
in the transport state
260x260x130
Weight, kg
4,5
Scales up to 3 kg of 4-th class in the package with purkey not included, but are available on request.
Tel/Fax: (057) 703-55-75;
mob.: (098) 838-99-10 Basil;
mob.: (066) 737-48-19 Sergey;
mob.: (097) 000-51-14 Maxim.