Incubator TC-1/80 SDA

Intended for obtaining and maintaining inside the working chamber of a highly stable temperature.
Intended for obtaining and maintaining inside the working chamber of a highly temperature necessary for carrying out bacteriological and serological studies. The working chamber of the thermostat is made of mirror stainless steel, the volume of the chamber 80 HP
The thermostat provides:
automatic control and maintenance of the set temperature;
continuous temperature measurement in the working chamber of the thermostat;
digital display of current and specified temperature on the basis of light-emitting elements;
lighting and ventilation of the working chamber;
alarm emergency.
Specifications:
The volume of the working chamber, l
Maximum temperature range temperature, °SOT t OCD. air to +60
The discreteness of the set temperature, °C0,1
The maximum deviation of the average temperature of any point of the displacement from the target at the steady state thermal conditions, °C, not more than:
from +25° to +45° inclusive
from +45° to +60°
from -1 to +1
from -2 to +1
The maximum temperature deviation at any point in the working chamber from the average, °C±0,4
The time of the operation mode setting, min, not bolee
Time of continuous operation of the thermostat is in automatic mode, h, not less than 500
Voltage, 220V±10%
Frequency, Hz±1
Maximum power consumption, Wt
Dimensions, mm x 528 x 753
The dimensions of the working chamber, mm x 393 x 496
Mass, kg
The average service life, years, not less than
Tel/Fax: (057) 703-55-75;
mob.: (098) 838-99-10 Basil;
mob.: (066) 737-48-19 Sergey;
mob.: (097) 000-51-14 Maxim.