Furnace for carburizing metal

Cementation is produced in shaft furnace equipped with a heat-resistant retort (steel 20H23N18, the wall thickness of 8 mm by default).
Cementation is produced in shaft furnace equipped with a heat-resistant retort (steel 20H23N18, the wall thickness of 8 mm by default). Heat the retort fixed in the electric furnace.
The furnace is designed to run on liquid carburizer (kerosene), it can also work the electric furnace natural gas (for this, additionally, you must install the site gas supply).
When grouting the surface of products such as carbon monoxide, resulting from high-temperature conversion of raw materials coming into contact with details is decomposed into carbon dioxide (CO2) and atomic carbon, the latter diffuses into the steel, forming a solid solution with iron.
The gas pressure in the retort 10..50 mm. water.article Seal the lid of the retort two level:
the first level - sandy shutter
second - asbestos cord.
After loading items in the retort is kerosene, exhaust gas sbrasyvatsya at the top of the muffle "the candle". Before and after cementation the retort is purged with carbon dioxide or any inert gas
# naimenovaniyami.naprimer (volume) of the working space, immodesty, kuttamperoor,ºC
(width, length. high)
Furnace for carburizing metal
SSCM 4.6/10 Iamentary deflation.400,height 600 20 1000
SSCM 6.6/10 Idiom.600,height 600 40 1000
SSCM 8.8/10 Idiom.800,height 800 1000 60
SSCM 6.12/10 Idiom.600,height 1200 50 1000
SSCM 8.18/10 Idiom.800,height 1800 100 1000
Tel/Fax: (057) 703-55-75;
mob.: (098) 838-99-10 Basil;
mob.: (066) 737-48-19 Sergey;
mob.: (097) 000-51-14 Maxim.