The valve needle KI G-K1/2V-K1/2V
Offer type: salePublished: 18.07.2013
| Seller: |  Sivkin Dmitrij |
| Phones: |  (8352)641723 Show phone |
| Address: | Russian Federation, Chuvashia, Cheboksary |
The valve needle KI G-K1/2V-K1/2V, is applied to the engineering control used in differential pressure gauges on the thermal lines. Is similar to SB. For industries that rely heavily valves, include petroleum, oil, gas, chemical industry. Valve needle suitable for use with the following media: steam, water, slightly aggressive, aggressive, gaseous petroleum products.
The basic material for the manufacture of valve Steel 20 also applies the seal graflex™. Steel 20 (high carbon), perfect for making needle valves due to its structural characteristics. Structural features of metal - rack (batch) martensite, it appears in the result, thermal processing of metal, which increases the strength of steel.
The valve of our production can be used outdoors (in the areas of macro-and moderate climate), where the ambient temperature is not less than -40 °C. connecting the ends of the valve equipped with an internal thread Rc½, through which is provided the connection to the pipeline or the boss. For this connection is simple and reliable sealing option is linen lock, tape FUM. To reduce gaps connection, use rubber gaskets or cement
The smooth flow of the working fluid achieves by changing the working side of the stem, which has the form of a narrow cone. The advantages that can be considered basic: small stroke of the valve, ease of repair, a high degree of tightness of the locking member. This model has a valve has one feature, which increases the reliability of stock welded to the housing. Every detail of the valve was held galvanic treatment.
The product Valve needle KI G-K1/2V-K1/2V staffed by technical condition, the Declaration of conformity warranty obligation.
The basic material for the manufacture of valve Steel 20 also applies the seal graflex™. Steel 20 (high carbon), perfect for making needle valves due to its structural characteristics. Structural features of metal - rack (batch) martensite, it appears in the result, thermal processing of metal, which increases the strength of steel.
The valve of our production can be used outdoors (in the areas of macro-and moderate climate), where the ambient temperature is not less than -40 °C. connecting the ends of the valve equipped with an internal thread Rc½, through which is provided the connection to the pipeline or the boss. For this connection is simple and reliable sealing option is linen lock, tape FUM. To reduce gaps connection, use rubber gaskets or cement
The smooth flow of the working fluid achieves by changing the working side of the stem, which has the form of a narrow cone. The advantages that can be considered basic: small stroke of the valve, ease of repair, a high degree of tightness of the locking member. This model has a valve has one feature, which increases the reliability of stock welded to the housing. Every detail of the valve was held galvanic treatment.
The product Valve needle KI G-K1/2V-K1/2V staffed by technical condition, the Declaration of conformity warranty obligation.
