Lantern nonactinic
Offer type: salePublished: 21.07.2013
| Seller: |  Market Vyacheslav |
| Phones: |  +380938682488 Show phone |
| Address: | Ukraine, Kyiv Oblast', Kyiv |
Lantern nonactinic is designed for lighting of work places in the processing of x-ray films x-ray medical institutions. The uniqueness of the lantern that the lighting created them allows you to work with films of any sensitivity.
When processing photographic distance to the light is not limited.
The durability of the lamp is determined by the absence of filters subject to rapid aging.
Lantern nonactinic complies with the technical conditions and found fit for service.
Negligible power consumption allows you to quickly recoup the costs.
Technical data:
The size of the illuminated field: 180 x 270 mm
Wavelength pacticing lighting, not less than 650 nm
Illuminance at a distance of 20 cm: 10 LK
Power: 220V, 50Hz
Power consumption, max: 2W
Weight: 0.5 kg
Procedure:
The power cord's plug to insert into the socket with a grounding wire.
To turn off the lighting.
Begin processing x-ray film.
Upon completion of the work off the lamp by removing the plug from the socket.
Maintenance:
Once a week the lantern wipe with a dry cloth.
Once a month to verify the integrity of the plug and cord.
Storage rules:
The lantern should be stored in a heated and ventilated storage at ambient temperature 5-40°C and relative humidity 80% at 25°C
When processing photographic distance to the light is not limited.
The durability of the lamp is determined by the absence of filters subject to rapid aging.
Lantern nonactinic complies with the technical conditions and found fit for service.
Negligible power consumption allows you to quickly recoup the costs.
Technical data:
The size of the illuminated field: 180 x 270 mm
Wavelength pacticing lighting, not less than 650 nm
Illuminance at a distance of 20 cm: 10 LK
Power: 220V, 50Hz
Power consumption, max: 2W
Weight: 0.5 kg
Procedure:
The power cord's plug to insert into the socket with a grounding wire.
To turn off the lighting.
Begin processing x-ray film.
Upon completion of the work off the lamp by removing the plug from the socket.
Maintenance:
Once a week the lantern wipe with a dry cloth.
Once a month to verify the integrity of the plug and cord.
Storage rules:
The lantern should be stored in a heated and ventilated storage at ambient temperature 5-40°C and relative humidity 80% at 25°C
