silicone platinum-based food silicone, silicone for cupcakes

silicone platinum-based hardness 15 shore a, which is easily mixed in a ratio of 1A:1B by volume (no need to use weights). He has a rather low viscosity and for most applications do not require vacuum degassing. E-615 cures with very low shrinkage in soft, durable rubber with high tear resistance. E-615 - two-component silicone with lifetime 30-40 min and curing for 4 hours.

 

Application:

 

Silicone condensation cure for the manufacture of a detailed reproduction of the surfaces and objects in the prototype development,the manufacture of industrial tools and artificial stones,precision molds, PU molds, condoms,bait for fish,plastics,soap,wax,gypsum,concrete,polyurethane,polyurethane foam(as well as in art and restoration work),cupcakes,and sweets(the food industry) and so on.

 

Technical parameters:

 

Model: E615#

Color: translucent

Curing agent (%): 1 : 1

While working with the mixture at 25 ° C (min): 20-50

Curing time( hour): 2-6

Hardness( Shore A ) : 15±2

Tear resistance (kgf/cm2 ): ≥60

Tensile strength (KN/m): ≥18

Viscosity(cps): 5000±3000

Linear shrinkage (%) : ≤0.1%

Elongation at break(%): ≥550%

 

Operation instructions WELL-E silicone rubber condensation-cure(platinum catalyst):

 

1. Please clean completely before operation to prevent cure inhibition.

2. Weigh the two parts correctly,electronic weight in two separate container.

3. Mix two Casta:1 and mix part a and part b evenly in 2-3 minutes.

4. And to get the mixture to a vacuum pump for de-air bubbles within 2-minute(If there is no vacuum machines,please pour the mixture gently and slowly down the side of the form the frame so that less purecov called.)

5. servcice product(the original model) with four plastic or wooden plates.

6. Clear your products and clean layer separation structure(detergent or soapy water) on your product.

7. Pour the mixture in vacuum model frames from the shape of the frame.

 

If you need silicone rubber, please.Contact us.

 

Website: http://www.sellsilicone.ru/

E-mail: hyjwj@szrl.net

Contact Person: Nikolay

telephone: +0086(755)89212381

m t: +8613242092065

Skype: silicagel7