Reaper roller mounted gun-6N

Reaper roller mounted gun-6N

Description:

Reaper roller mounted gun-6N is designed for cutting grain, cereals and cereal crops in a separate way of cleaning with the laying of the crop in a single swath. Used in all soil-climatic zones. Reaper can be used as procaccia, obmascik and for laying double rolls, which on the left side there is the drain shield.

Mounting:

Reaper Jun-6U hung on harvesters SC-5M "field", "field Effect", "Yenisei-1200" (issued before 01.01.2003). SKD-5 "Siberian" directly onto the sloping camera harvester without causing the removal of the main nodes. Model gun-6U -01/-02 is a modification of the serial header Jun-6U and fully prepared for mounting with self-propelled chassis mowers-roll CPS-5G, CPS-5B, D-101 and power E-304. Differs from the basic model system hydraulics and the presence of an intermediate transmission.

Distinctive features of Reaper Jun-6N from reapers Jun-6B, Jun-6A and similar reapers Jun-6U other manufacturers:

• Used in a fundamentally new gearless drive scheme of the conveyor and the blade of the cutting unit. Instead of unreliable gear drive of the drive shaft of the conveyor belt used belt transmission, which significantly reduces the risk of stopping the conveyor belt due to jamming or breakage of the previously used gear, and also allows you to save on the repair.
• Improved design of the connecting rod and the scenes of the drive of the knife and its mounting.
• Used pressed steel variator drive reel with the use of rolling bearings and steel sprocket. The drive of the knife is made from a rod through the rocker is connected to the knife cylinder and connecting rod through the bearings SHS-25 instead of steel cheeks and spherical fingers. In the design of the rod entered 2 silent block, which reduces shock loads attributable to the entire crank the group, and the connecting rod, thereby increasing the service life of bearings and assemblies. The rocker shaft is securely attached a rope instead of brackets worksheet.
• Reaper has a new protivolodochnyi dukakiscenter the reel completely excluding the winding of the crop.
• Significantly strengthened beam cutting apparatus, the upper zone of the frame header, sidewall, the beam of the reel and its other elements that increased the reliability of the reapers.
• Extending in the direction wybranego Windows platform guarantees the quality of the forming roll and high reliability of the technological process.
• The Reaper is applied to the reel universal, bespredelnoe, five-bladed with a tilt mechanism of the tines, protivozastojnoe, excluding the winding at the junction of the beam-pipe tines" of the crop. On the trunnion shaft of the reel equipped with safety-overrunning clutch that when critical loads eliminates the breakage of the reel and facilitates its maintenance(you can scroll through the reel during its motion without putting too much effort)). From proper Assembly and installation of the reel on the header, it depends for its reliable performance and quality of the implementation process. Support of the reel is made of tube 80 x 40 instead of 60 x 30, which excludes the possibility of their deformation.
• Instead of unreliable iron variator (insufficient quality to flow, rapid wear) applied stamped from steel sheet using ball bearings instead of plain bearings and sprockets made of steel, making variation a group are more reliable and durable in comparison with the previous models used on the reapers Jun-6A and gun-6B.
• The idler shield on the left side allows mown swaths and to form double rolls. Timber cutting apparatus is greatly enhanced, preventing its deformation.
• The upper belt Reaper significantly strengthened in the area wybranego window.