Reaper leguminous roll upgraded GBW-5

Reaper leguminous roll upgraded GBW-5

Description:

Reaper GBW-5 is used for mowing, followed by laying the crop in a single counter-flow roll, grain, legumes, green peas, beans, seed sugar beet, grain and laid seeded grasses. The design of the Reaper is designed for separate cleaning. Used in all soil-climatic zones. Fibrosnoe box in the header is located in the center, which has a positive effect on the quality of the formation of a counter-flow of the roll, and enables you to perform mown swaths and obcasy.

Mounting:

Reaper is coupled to a power KPS-5G, CPS-5B, F-101, F-301-304.

Distinctive features of Reaper GBW-5 from similar reapers GBW-5 other manufacturers:

• Increased cutting width, allowing you to increase the productivity of harvesters in the selection of rolls, rational use of machinery.
• Applied a fundamentally new gearless drive scheme of the working bodies of the reapers, which increases reliability and reduces maintenance costs Reaper. To drive the cutting unit applied direct-drive scheme that transforms rotary motion into wasurete-and-forth. The drive is carried out via drive belts, pulleys and the crank mechanism, which has significantly increased reliability and simplified maintenance of this site.
• Reaper has a new protivolodochnyi dukakiscenter the reel, which completely eliminates the winding of the crop on the tines.
• The cutter head open type, bespaliy, with one movable knife with reinforced components provides the perfect slice of plants by increasing their speeds. Application schema "upper movable knife, lower fixed" allowed to increase reliability, simplify maintenance and improve the quality of the cut. In consequence of the fact that the lower knife section, this significantly reduces the time to replace the damaged segments.
• In a chain transmission drive of the reel is provided by the overrunning clutch reducing the load on the drive of the reel during shutdown Reaper and creates additional convenience for maintenance. Kinematic diagram of the drive of the reel simplified, more reliable and easier to maintain. Sprocket clutch is made of a chain of sheet metal with hardened ring gear, which prolongs its service life.
• Improved wiring diagram of the transmission gear shaft (the connection is made through a spherical bearing). Simplified and enhanced the design of the connection of the transmission with the transmission shaft and the mounting of the shaft on the frame header that excludes them from being crushed. Reliability is improved chain couplings and improved kinematics drive right drive shaft of the conveyor using a more powerful V-belt, eliminating the falling of the belt from the pulley on the reverse, the design of the transmission is simplified.
• In Reaper lowered the threshold between the cutting apparatus and the conveyor (to avoid clogging of the cutting unit beveled mass) by moving the connecting rod group drive the cutting unit of the cutting zone in the rear of the harvester.
• Changes in the design of the frame and beams of the reel. Instead of the speed of the left support applied direct design support in a horizontal plane. In the vertical plane of the support have a deflection, which improves the supply reel laid weight to the cutting device. Changes in the design of the frame, the beams of the reel and the other nodes increased the strength of the reapers, its reliability, and reduced time for maintenance.