Reaper roller speed IVS-6,4 (panetary mechanism of the cutting apparatus)

Reaper roller speed IVS-6,4 (panetary mechanism of the cutting apparatus)

Description:

Reaper roller speed IVS-6,4 designed for cutting grain, cereals and cereal crops with the laying of the crop in a single counter-flow swath for better boot combines high-performance class "John Deere", "don" on the selection of rolls. Operated in all soil-climatic zones. Application trailed harvester GWS-6,4 allows to reduce costs for separate cleaning, vacate the portion of the harvester from working with roller cutters and more optimally load the vehicle fleet.

Mounting:

Reaper is aggregated with tractors UMZ-6, MTZ-80, MTZ-82.

Distinctive features of Reaper GWS-6,4 from Reaper GIT-6.4 and similar reapers GWS-6,4 other manufacturers:

• Used cutter machine is similar to the system SCHUMAHER ". Using planetary drive (instead of mksh) increased the cutting speed by a factor of 1.2, which resulted in increased productivity of the harvester 20%. In the cutting apparatus applied stenochlaena fingers, excluding the daily adjustment of the gaps and improve the quality of the cut.
• The height of the threshold from the cutting unit to the conveyor is much lower, which reduces losses cut by ear when harvesting undersized grain.
• Minimum installation height of cut lower due to the original design of timber cutting apparatus - 60mm against 80mm.
• Four adjustment range rotation speed of the reel (21, 29, 37, 51 turnovers) against the two bands (38, 49 turns), which reduces the loss cut the spike due to release their reel from a mismatch of the speed of the harvester and the speed of rotation of the reel.
• Working height earrings of Sneezy hitch tractor 200mm against 400mm that does not require rearrangement of the outer levers on slots. On older tractors that permutation to do the almost impossible.
• Reliable, easy, dukakiscenter, easy for Assembly and maintenance of the reel of the classical scheme.
• The stabilizer Reaper adjustable, allowing you to set it work on soils with different structure.
• Right (field) side already, which eliminates primenenie it uncut mass.
• Adjusting the minimum height of the slice and trim Reaper divided into unrelated operations, allowing them more accurately.
• For lifting the reel is used plunger and piston bypass cylinders that eliminate the bias of the reel above the cutter bar of a combine and as a consequence reduces the losses do not cut the ear at harvest undersized grain and improves cut quality.
• The original design of hydraulic jacks allows to reduce time of transfer Reaper from operating position to transport position and Vice versa.
• New kinematic scheme of the drive of the working bodies provides a stable working angles of slyvania joints cardan transmission, which increases their service life and allows you to leave the header in a raised platform.
• Reaper is easier analogues by weight.
• Reaper shifted to the right, allowing you to use it on the entire width.
• Lifting height of the frame header in the area of the discharge window above, which allows to remove high-yielding crops.
• The shape of the wind shield eliminates throwing a reel or blowing wind cut weight back behind the Reaper.
• Four of the conveyor belt instead of five with a slight narrowing of the table helped to narrow the frame thereby reducing the weight of the header and the load on the pipe frame.
• Belt drive of the reel is possible to reduce the load on the chain of transmission, thereby extending their service life.
• The minimum number of revolutions of the reel (21 vs. 38) allows you to work the Reaper at lower speeds without loss when cleaning heavy easily crumbling cultures and exclude losses from transfers of the reel through the wind shield back.
• This has become easily accessible safety (telescopii) mechanism, daily used in the translation header from operating position to transport position and Vice versa.

Specifications:

Width of 6.4 m

Performance to 5.4 ha/h

Weight 2 050 kg