Device for rapeseed PRBG-DM

Device for rapeseed
The fixture consists of a frame and the left sidewall, which has mksh, horizontal and vertical movable and stationary knives. The right panel are removable with movable and immovable vertical knives. On the sides are attached adapters, simulating the contour of the sidewalls of the reapers, and quick thrust, tightening the combine harvester with the device. As the connecting rod thrust applied to the ball joint.

Hung on the Reaper device PRBG allows to reduce losses when harvesting canola up to 30% in comparison with conventional cleaning using uniflow Reaper harvester.

Works in the unit: with domestic and imported harvesters

Specifications

Name

Value

Ed. MEAs.

Width

6

m

Working speed

10

km/h

Transport speed

20

km/h

Performance

by the harvester

ha/h

Height of cut

by the harvester

mm

Platform width

700

mm

Number of double strokes of the knife

497

LW.x/min

Weight

400 700...

kg

Drive type

The pumping mechanism washers (mksh)

Aggregated: "don 1500" , "Vector"(until 2006)

Reaper: "ZHU-6" with capture 6m.

All products are certified by the State Committee on standardization, Metrology and certification.

THINK, DECIDE AND CHOOSE THE BEST.

Equipment:

· Fixture consists of a frame and two side walls.

· Left sidewall stocked mksh , vertical movable and stationary knives

· Right side panel are removable with movable and immovable vertical knives .

· Vertical knives are made using the double segments , which helped to minimize vibration of the side walls and fixtures in General by reducing the stroke length of the knife.

· On the side are attached adapters , simulating the contour of the side of the reapers , and quick thrust ,tightening fixture with a combine harvester.

· The frame is equipped with a finger beam , which is made of specialized seamless pipes and seamless corner , ensuring the straightness finger beams in horizontal and vertical plane .

· As the connecting rod thrust applied to the ball joint.

· The device is driven by a belt from a combine harvester.

· Hung on harvester device PRBG allows to reduce losses when harvesting canola up to 30% compared to traditional cleaning using flow combine harvester