Device for rapeseed PRBG-J,RM

Device for rapeseed
The fixture consists of a frame and the left sidewall, which has mksh, horizontal and vertical movable and stationary knives. The right panel are removable with movable and immovable vertical knives. On the sides are attached adapters, simulating the contour of the sidewalls of the reapers, and quick thrust, tightening the combine harvester with the device. As the connecting rod thrust applied to the ball joint.

Hung on the Reaper device PRBG allows to reduce losses when harvesting canola up to 30% in comparison with conventional cleaning using uniflow Reaper harvester.

Works in the unit: with domestic and imported harvesters

Specifications

• Width of 6.7 m
• Working speed up to 10 km/h
• The transport speed of 20 km/h
• Performance by the harvester ha/h
• The height of the cut by the harvester mm
• Platform width 700 mm
• Number of double strokes of the knife 497 DV.x/min
• Weight 400...700 kg
• The type of drive Mechanism tumbler washers (mksh)

Fit: John Deere 9500 and other

Reaper: 622R ( Europe ) with capture 6.7 m

All products are certified by the State Committee on standardization, Metrology and certification.

THINK, DECIDE AND CHOOSE THE BEST.

Equipment:

· Fixture consists of a frame and two side walls.

· Left sidewall stocked mksh , vertical movable and stationary knives

· Right side panel are removable with movable and immovable vertical knives .

· Vertical knives are made using the double segments , which helped to minimize vibration of the side walls and fixtures in General by reducing the stroke length of the knife.

· On the side are attached adapters , simulating the contour of the side of the reapers , and quick thrust ,tightening fixture with a combine harvester.

· The frame is equipped with a finger beam , which is made of specialized seamless pipes and seamless corner , ensuring the straightness finger beams in horizontal and vertical plane .

· As the connecting rod thrust applied to the ball joint.

· The device is driven by a belt from a combine harvester.

· Hung on harvester device PRBG allows to reduce losses when harvesting canola up to 30% compared to traditional cleaning using flow combine harvester