The rotary mower SCC-2,1

technical description

The mower SCC-2.1 is designed for mowing grass at higher translational speeds with the laying of the crop in a swath. The mower is aggregated with tractors of class 0,9-1,4 ie

 

Technological process mowers

Cutting the stalks of the plants is carried out with knives pivotally mounted in the rotors, rotating towards each other. The knives cut the grass on the principle bestporno slice, pack it and carry on swath, moving over cutting timber. The trajectory of the knife adjacent rotors mutually overlap, providing quality swath.

The structure and operation of component parts mower

Attaching mower to tractor hitch device by using the frame hinge. The frame is articulated on an axis attached to the cross beam. Beam is a welded construction frame, inside of which there are shafts and bevel gear pairs. In this way the beam plays the role of a conical gear. Conical reducer is designed to transmit rotation to the rotors of the cutting unit.

To prevent breakage of the cutting apparatus at the time of its collision with an obstacle (rocks, stumps, and so on) on the mower provides traction fuse. Force the fuse is governed by the compression spring. When hitting the cutter bar of the mower obstacle under the influence of increasing the tractive resistance of the latches disengage, resulting in the length of the traction fuse increases and the mower expands ago, thus preventing the cutter from damage.

For lifting the mower in the upper transport position it is located hydraulic cylinder rods. The maximum rise in the upper position limited by the installation of the clamp on the rod of the hydraulic cylinder.

It is important what is inside .

Some disc mowers may look on the outside is exactly the same as mowers “AGNES “, but most important is what is inside of them. When choosing a mower, always check that it is impossible to see outside. After some time, cheap machine becomes one of the most expensive acquisition ever made.

Acceptable operating speed, high performance mowing. Disc mowers KRN farmers will discover a new and incomparable comfort of use. Thermally processed bevel gears and powerful angular contact bearings used on mowers, KRN , meet the most stringent requirements in terms of durability and reliability.

High-quality knives to meet the most stringent safety standards. Their geometric shape to provide high quality cut.

The entire gear unit has a reliable seal. For seals on the shafts used cuff class TC , for sealing the gear cover uses a special airtight rubber seal.

For protection against flying stones on the mower is provided by the upper metal plates and side covers are made from PVC fabric.