Mower tractor finger KTP-2,1

The mower segmented KTP-2,1

Mower tractor finger KTP-2,1 is designed for mowing seeded and natural herbs with the laying of the crop in the spreading.

The mower KTP-2,1 is used in all soil-climatic zones.

The mower is aggregated with tractors MTZ-80/82; UMZ-6L/6M; T-25, T-40 and is attached directly to the hitch device of the tractor.

• Weight (dry) 120 kg
• Structural width of 2.1-0.2 m
• The rate for 1 hour of basic time of 1.25-2.5 ha/h
• Working speed on basic operations 6-12 km/h

Transport speed:

• when raised and secured for long-distance moving mower, not more than 20 km/h
• while lifting the mower to the middle of moving across the field, not more than 12 km/h
• Ground clearance, not less than 300 mm

Dimensions:

• in the working position:

length 1160 mm

width 3660 mm

height 875 mm

• in the transport position (when traveling on roads with tractor MTZ-80)

length 4600 mm

the width of 1910 mm

height 3300 mm

The minimum height of 50 mm slice

Cutting machine:

• the type of segment-finger
• drive the knife crank
• the stroke of the knife 76 mm
• staff 1 mechanic

The main parts of the mower are:

• linkage;
• the supporting beam;
• the cutting apparatus;
• the hydraulic lifting of the cutting unit;
• the outer (right) divisor;
• a protective guard;
• transport thrust;
• cardan transmission.

Drive mower is the PTO transmission shaft from the power take-off (PTO) of the tractor to the shaft receiving power 8(VPM) of the mower. Double drive pulley 3, is rigidly connected to the PTO, through V-belt transmits rotation to the shaft of the driven pulley. Cam rigidly mounted on the shaft of the secondary pulley, converts the rotary motion of the shaft into reciprocating motion of the blade of the cutting device through the connecting rod.

The process of mowing occurs as follows: when moving the tractor mounted mower on the field, the grass, getting between segments of the moving knife and a share of the edges of the pads of the fingers cut off. Cut plants waddle through the cutter and placed on the surface of the field. Thus stebleton on the inside ski, removes the cut grass from the head of the knife slightly to the right and stebleton installed on the external divider removes the cut grass to the left, providing free passage for the internal skis on the next arrival.

The beam apparatus equipped with the best quality of cut inertial efforts, the consumption of power for cutting and the total load on the blade segments, as well as operational reliability is cutting apparatus with a welding finger, with four sacks, while the blade segments alternate notch up and down. This cutting apparatus does not require daily adjustment of the gaps between the clamps and segments. Segment is not wiped by the clamp. High quality cut as an upright stems, and laid, as the cutting action of inclined stems easier if the stems pererezaetsya knife whose edge sharpening blade is at the bottom, i.e. the inverted segment. This reduces clogging of the cutting unit. Reduces the cost of repair of these valves fingers through equipping them exchangeable share plates N 006.56.

DESCRIPTION MOWER HERBAL FINGER KTP-1,3; KTP-1,4 ; KTP - 1,5 ; KTP - 1,8 ; KTP - 2,1

Timber mower apparatus equipped with the best quality cut, inertial efforts, the consumption of power for cutting and the total load on the blade segments, as well as operational reliability is cutting apparatus with stenochlaena finger. This cutting apparatus does not require daily adjustment of the gaps between the clamps and segments. Segment is not wiped by the clamp. High quality cut as an upright stems and laid, as the cutting action of inclined stems easier if the stems pererezaetsya knife whose edge sharpening blade is at the bottom, i.e. the inverted segment. This reduces clogging of the cutting unit