Protectosil antigraffiti sp
Offer type: salePublished: 03.07.2015
| Price: | negotiated |
| Company: | OOO 'Vell-Him' |
| Seller: |  Nataliya |
| Phones: |  +380445685146 Show phone |
| Address: | Ukraine, Kyiv |
"Protectosil ANTIGRAFFITI SP - aqueous silane/silicon system, giving the surfaces of porous mineral building materials, hydro - and oleophobic properties. Contains almost no volatile organic components (VOC). The use of Protectosil ANTIGRAFFITI SP provides good resistance to atmospheric factors with maintaining water vapor permeability. Protectosil ANTIGRAFFITI SP is a ready to use product.
Protectosil ANTIGRAFFITI SP can be used as sredstvo protection from applying graffiti is not painted on mineral building materials, such as:
• Concrete
• Brick/clinker (high strength brick)
• Sandstone
• Sandy limestone (natural stone)
The number of operations of the application and need for this number of Protectosil ANTIGRAFFITI SP depend on the substrate and the desired effect. To ensure adequate protection against graffiti need to apply several layers of Protectosil ANTIGRAFFITI SP. Very porous and absorbent surfaces absorb more product than smooth, dense and microporous materials. Recommended to carry out a control test to determine the exact extent of the opacity.
Protectosil ANTIGRAFFITI SP is a water system. Therefore the product should not be applied at temperatures below 3 °C. During application the surface temperature and the environment must be in the range from 5 °C to 40 °C. Before applying Protectosil ANTIGRAFFITI SP needs to be shaken to re-disperse the deposited material."
Protectosil ANTIGRAFFITI SP can be used as sredstvo protection from applying graffiti is not painted on mineral building materials, such as:
• Concrete
• Brick/clinker (high strength brick)
• Sandstone
• Sandy limestone (natural stone)
The number of operations of the application and need for this number of Protectosil ANTIGRAFFITI SP depend on the substrate and the desired effect. To ensure adequate protection against graffiti need to apply several layers of Protectosil ANTIGRAFFITI SP. Very porous and absorbent surfaces absorb more product than smooth, dense and microporous materials. Recommended to carry out a control test to determine the exact extent of the opacity.
Protectosil ANTIGRAFFITI SP is a water system. Therefore the product should not be applied at temperatures below 3 °C. During application the surface temperature and the environment must be in the range from 5 °C to 40 °C. Before applying Protectosil ANTIGRAFFITI SP needs to be shaken to re-disperse the deposited material."
