Digital DT-A digital multimeter tester
| Price: | 294 UAH |
| Company: | OkolloMetro |
| Seller: |  Panyukova Yana |
| Phones: |  +380673222484 Show phone |
| Address: | Ukraine, Kyiv |
Professional digital multimeter DT-9208A
Multimeter DT9208A
Multimeter DT9208A is designed to measure current, voltage, resistance, diodes and transistors, as well as frequency and temperature. DT9208A is one of the most good multimeters in terms of price/functionality. That is why many get this device replaced the simpler DT830. Working with a multimeter: check the battery after turning on the device. If the battery is low, the display will appear the sign [- +]. Replace the battery. The sign "!" Located near the terminals of the device warns that the input currents and voltages must not exceed the specified values. This is done to prevent damage to the circuits of the multimeter. Before measurement it is necessary to switch limits set to the desired measurement range. If the limit of the measured current or voltage is unknown beforehand, set the switch limits to maximum and then shift down as needed. If the display of the symbol "1" (overload) you must switch to the upper limit of measurement.
Technical specification of multimeter:
* AC voltage:
Range resolution Accuracy
20 V 10 mV ±1%±5D
200 V 100 mV ±1%±5D
750 V 1 V ±1.2%±5D
The value of AC voltage is the mean value calibrated to the RMS value of a sine wave.
Operating frequency range: 45 to 450 Hz.
Input impedance 10 Mω for AC voltage.
* DC voltage:
Range resolution Accuracy
200 mV mkV 100 ±0.5%±3D
2 V 1 mV ±0.8%±2D
20 V 10 mV ±0.8%±2D
200 V 0.1 V ±0.8%±2D
1000 V 1 V ±1%±4D
Input impedance 10mom .
* Resistance:
Range resolution Accuracy
200 Ohm 0.1 Ohm ±1%±10D
2000 Ohm 1 Ohm ±1%±4D
20K Ohm 10 Ohm ±1%±4D
200 Ohms 100 ohms ±1%±4D
2 MOhm 1 KOhm ±1%±4D
20 MOhm 10 KOhm ±1%±10D
200 MOhm 100 KOhm ±5%±20D
* DC current:
Range resolution Accuracy
20 µa 0.01 µa
20 mA 10 µa ±2%±3D
200 mA 100 µa ±2%±5D
10 A 10 mA ±2,5%±10D
Overload protection: fuse 200mA/250V.(20 A range is not protected ).
* AC current:
Range resolution Accuracy
200 mA 100 µa ±2%±2D
10 A 10 mA ±2%±10D
Overload protection : 0.2 A fuse (20 A range is not protected ).
* Capacitance:
Range resolution Accuracy
2 nF 1 pF ±4%±5D
20 pF 10 pF ±4%±5D
200 pF 100 PF ±4%±5D
2 µf 1 nF ±4%±5D
20 µf 10 nF ±4%±5D
50 UF 25 pF ±4,5%±5D
* Measurement frequency:
Range resolution Accuracy
2 KHz 1 Hz ±3%±5D
200 KHz 100 Hz ±3%±5D
* Temperature measurement (models DT9207A, DT9208A):
Range resolution Accuracy
from-40C? to +400C? 1 With? ±1%±4C?
from +400C? to +1000C? 1 With? ±1,5%±15S?
D-the smallest unit.
The diode test.
Audible continuity test connection.
The measurement of the gain of the transistor.
Power supply: 1 9V battery type "crown" (built-in)
The ability to adjust the tilt of the screen
Rubber stand
Convenient leg stand-mount styli
The delay function of the indications on the screen (HOLD-ON)
The maximum value on the display 1999 (3 1/2 digits)
Temperature range: operating temperature 0?P - 40?With
Storage temperature -10?C - 50?With
Size: 191*89*35mm (L*W*h)
Weight: about 310g (with battery)
Accuracy is guaranteed at temperatures measuring 23?C±5?S.
Package contents:
