A low pressure polyethylene HDPE grade PE2NT11-285Д
Offer type: salePublished: 09.07.2016
| Price: | 111 RUR |
| Company: | Nizhnekamskneftehim |
| Seller: |  Dinar |
| Phones: |  +7(906)331-74-88 Show phone |
| Address: | Russian Federation, Republic of Tatarstan, Nizhnekamsk |
Polyethylene
low pressure HDPE grade PE2NT11-285Д - used for the production of films from
10 microns (thick film) and pressure water pipes.
Brand: PJSC "Kazanorgsintez"
Country
manufacturer: Russia
Technical
specifications (TU): TU 2243-174-00203335-2007
Mass
fraction of volatiles, mg/kg, not more than 350
Relative
elongation at break, %, not less: 600
Density,
kg/m3 at 20°: 949-952
Density,
kg/m3 at 23°: 947-950
Figure
melt flow rate at 190° C and under a load of 21.6 kgf, g/10 min: 5-9
Limit
yield strength tensile, MPa, not less than 20
Scatter
the melt flow index (ПТР21,6) within a lot, %, not more than ±10
Resistance
at constant internal pressure at 80° C at an initial voltage in
the pipe wall is 2.8 MPa (piping d110 SDR11), h, not less than: 1000
Resistance
at constant internal pressure at 80° C at an initial voltage in
the pipe wall 4.0 MPa, (on pipe d110 SDR11), h, not less than 165
Thermostability
at 200° C, min, not less than 20
