Tablet applicator (laminator)

Laminator is built using high quality parts on international level. Using only the best, provided using a laminator even 24/7. Special attention was paid to components:
- High precision durable rubber roller
Reliable Pneumatics
- Precise linear guides
- High reliability of the electronic control unit
The basis of the laminator there is a very strong steel frame, this means that nothing is deformed, even if it is installed on an uneven Paul. The desktop is 10 mm ESG glass, which is supported a large number of extensive elements, making the surface durable, which can easily withstand the weight of the operator. The servo is controlled panel, or alternatively from the foot switch. (optional)
Dimensions:
1400*2600
Convenient design:
Unlike laminators from other manufacturers, we do not use the portal on the video, making the lamination process easy, fast and much easier.
Roll holder:
With additional roll holder, the material is loaded easily and quickly. It is not necessary to download the material on the counter to fix it, you just have to put it on top between the shaft and stand, pulling it around the roller, which then falls to the beginning of the lamination.
Table with 10mm glass ESG:
As standard all models are supplied with a table with 10mm ESG glass. This solid surface makes lamentor easy to use even with printing on very thin material.
The heated roller is 100 ° C
Now you can order laminating machine with heating roller to 100 ° C. The heating roller ensures the avoidance of "silvering effect". "Effect silver means based ENCAPSULATION of AIR) entering air so that the glue not connected with printing on the small parts of your print material. When working with self-adhesive films, heat will heat up the glue so that it will fill the "rough" (raw, rough) the surface of paper or any vinyl. The effect is that you will have less to get the air and the result will be more vivid.
If You set the material to glass or organic glass you need will have a roller heated, because the glue needs to be completely transparent. The heating roller ensure a perfect result.
The switch is with Electromechanical drive
The laminator can be ordered with the manual version and with the servo. Version with servo works in the same way as the roller laminator. Version with motor drive offers the user the ability work from either end of the side of the machine. With careful management engine, the time between removing the substrate and the seal is minimized, greatly reduces the chances of dust during lamination. At a constant the servo even very thin substrates can be used exactly. When working with a small printing formats, they have to be located in the center of the table to provide uniform pressure. Choice machine with servo drive offers advantages in work and even greater quality lamination.
Led backlight:
The machine comes with a table illuminated by led strips, giving he even illumination of the entire desktop. Not only that, LEDs minimize power consumption, they have unlimited resource.
Individual table:
The laminator comes with a desktop height of 85 cm, providing comfortable working height when working, especially when there is a need to reach across the table during the processing of large formats. We offer additional function adjusts in height to adjust the height of the table 85 cm 100 1 cm adjustment is carried out manually with the screws on all 4 edges. Also, the laminator can be equipped with four wheels.