Cylindrical grinding machine 3А423
Offer type: salePublished: 16.07.2016
| Price: | 50 000 UAH |
| Company: | SKTrade |
| Seller: |  Kipnis Denis |
| Phones: |  (096)6441040 Show phone |
| Address: | Ukraine, Kirovohrads'ka Oblast', Hayvoron |
Cylindrical grinding machine 3А423
F products=650mm, L=1600mm, Dкр.=900mm, R=22kWt
The machine is designed for regrinding of indigenous and connecting rod necks of a cranked shaft of automobile and tractor engines of medium size in terms of remonty services.
The increased rigidity of the machine and power drive provides high-performance processing of journals with large allowances, for example, after surfacing.
The presence of the top of the turntable enables grind conical shanks crankshaft with a small taper, and the other conical part.
The balancing of the crankshaft when grinding the connecting rod journals is movable loads on the bullets.
Technical characteristics
Maximum dimensions of installed workpiece, mm:
rotation diameter 580
length centers 1600
the length in rounds of 1450
Diameter of grinding, mm
least 30
greatest in lunettes 110
most without steady rests 150
Maximum weight of billet, kg 150
The largest crank radius of the workpiece, mm 105
Moving speed of table, m/min 0,2-4
The greatest angle of rotation of the table, deg:
clockwise 2o
counterclockwise 3o
Number of speeds of the workpiece 4
The frequency of rotation of the headstock spindle, min-1 30, 60, 85, 174
Spindle taper:
headstock Morse 5
Tailstock Morse 4
Most wheelhead travel, mm:
the screw 175
rapid supply-branch 100
Diameter of grinding wheel, mm 750-900
Wheel height, mm 33-63
Number of speeds wheelhead 1
The spindle speed grinding headstock,-1 740
Power, kW 11
Dimensions, mm 5650х2530х1830
Weight, kg 7250
F products=650mm, L=1600mm, Dкр.=900mm, R=22kWt
The machine is designed for regrinding of indigenous and connecting rod necks of a cranked shaft of automobile and tractor engines of medium size in terms of remonty services.
The increased rigidity of the machine and power drive provides high-performance processing of journals with large allowances, for example, after surfacing.
The presence of the top of the turntable enables grind conical shanks crankshaft with a small taper, and the other conical part.
The balancing of the crankshaft when grinding the connecting rod journals is movable loads on the bullets.
Technical characteristics
Maximum dimensions of installed workpiece, mm:
rotation diameter 580
length centers 1600
the length in rounds of 1450
Diameter of grinding, mm
least 30
greatest in lunettes 110
most without steady rests 150
Maximum weight of billet, kg 150
The largest crank radius of the workpiece, mm 105
Moving speed of table, m/min 0,2-4
The greatest angle of rotation of the table, deg:
clockwise 2o
counterclockwise 3o
Number of speeds of the workpiece 4
The frequency of rotation of the headstock spindle, min-1 30, 60, 85, 174
Spindle taper:
headstock Morse 5
Tailstock Morse 4
Most wheelhead travel, mm:
the screw 175
rapid supply-branch 100
Diameter of grinding wheel, mm 750-900
Wheel height, mm 33-63
Number of speeds wheelhead 1
The spindle speed grinding headstock,-1 740
Power, kW 11
Dimensions, mm 5650х2530х1830
Weight, kg 7250
