Corner clamp 3D (trichosia) 60mm welding and not only
Offer type: salePublished: 26.07.2016
| Price: | 800 UAH |
| Seller: |  Vel'gosh Andrij |
| Phones: |  0679270972 Show phone |
| Address: | Ukraine, L'vivs'ka Oblast', Lviv |
Corner clamp 3D (trichosia) for welding and not just the third hand of the master. Very easily attaches to table F-clamps, or clamped in a vise.
Often when welding frames, frames and other metal structures welded parts should be firmly fixed in the exposed position. Since the work is mainly produced on a welding table, for these purposes, an ordinary bench vise. But the vise can clamp the workpiece in one plane, and what to do if you need to weld a right angle, two angle, so much so that they are not "pulled" and angle "took"? For such purposes, and used corner clamps for welding.
This clamp is due to the moving of the jaws allows clamping of the profile of different size at an angle of 90 degrees (the angle holds up very well), the maximum profile 60 * 60,but can be made to order for any size of profile.
Often when welding frames, frames and other metal structures welded parts should be firmly fixed in the exposed position. Since the work is mainly produced on a welding table, for these purposes, an ordinary bench vise. But the vise can clamp the workpiece in one plane, and what to do if you need to weld a right angle, two angle, so much so that they are not "pulled" and angle "took"? For such purposes, and used corner clamps for welding.
This clamp is due to the moving of the jaws allows clamping of the profile of different size at an angle of 90 degrees (the angle holds up very well), the maximum profile 60 * 60,but can be made to order for any size of profile.
