Osmosis-industrial

Automated the installation of the reverse osmosis.

Reverse osmosis technology used for desalination and demineralization of water. After reverse osmosis the water is purified from salts of 99 to 99.8 %, depending on water composition, used type of membranes and the scheme of equipment.

Purified water is used for:

1. Steam boiler feeding(prevention corrosion of condensate lines, increasing efficiency, period payback in 1 year);

2. The production of beverages, juices, drinking water,

- industry (metallurgy, coke, chemical, food);

medicine;

- electronics;

construction companies, etc.

- crop, livestock, etc.;

- private commercial facilities, recreation centres, motels and others.

Equipment of reverse osmosis plants.

Mounting base:
· High pressure pump manufactured in Italy
· Membrane brands high quality GE Osmonics USA
· Membrane housing stainless steel or fiberglass
· Steel or stainless steel frame
· Piping installation, PVC

Manage the installation
· Programmable controller with the measurement of electrical conductivity (salinity) and temperature of purified water, with visualisation of the operation of the system.
· Control Cabinet installation protection and automatic starting, emergency stop.

Automation installation
· Solenoid valve on the line feeding raw water.
· Solenoid valve on the dirty water drain.
· Solenoid valve on the hydraulic line flushing. membrane osmotic water.
· Automatic hydrobromide when starting the installation.
· Automatic hydrobromide during operation.
· Automatic hydrobromide when zapalenie tank. osmotic water.
· Pressure sensors on the lines to control operation of the unit.
· Float level capacity of permeate.
· Sensor measuring conductivity and temperature of the purified water.

Protection installation
· Mechanical filter to protect the membrane from clogging by suspended solids.
· A pressure sensor at the inlet protection of the pump against dry running.
· Pressure gauge before the membrane protection of the membrane from high pressure.
· The pressure sensor in the permeate line protection of the membrane from destruction.
· Automatic overvoltage, thermal protection pump high pressure.

Control the work setting
· Conductivity meter measuring conductivity or salinity and temperature purified water
· Vibration-proof pressure gauge on the feed line of source water
· Vibration-proof pressure gauge before the membrane
· Vibration-proof pressure gauge after the membrane
· Flowmeter the discharge line
· Rotameter permeate line.
· Rotameters recirculation.
· Valve adjustment of flow in the discharge line.
· Valve adjustment of the flow in the recirculation line.

Additional equipment
· Node inhibitor dosing (dosing pump, dosing tank, reagent, binding PVC)
· Site mixing of raw water into the permeate through the ultrafiltration membrane.
· Node automatic flushing of the membranes with permeate with easy installation for a long time.
· The device metering of output of permeate (count).
· Post-filter (carbon or calcite).
· Host a chemical washing of the membranes (flush pump, mechanical filter, tank, chemicals, PVC piping).
· Installation preconditioning (fur. filtration, adsorption, iron removal, softening, ultrafiltration).

Controller for reverse osmosis systems AquaTech H2O.
Controller AquaTech H2O , this is the best addition to the system back osmosis, is equipped with a pump. Performs maintenance of the membrane and extend the term at least twice. The program which is wired into the chip designed specifically for tap water with a high content of chemical contaminants of silt and organic matter.

Controller functions:
- Automatic on/off setting GS low/high level capacity permeate.
- Protection against "dry run".
- Protection against high pressure.
Indication led status of the components installed.