Copper strip( M1 m2)

OOO "UNINTERSTING "carries out complex deliveries of the new certified metal all Standards and specifications under the order directly from factories of Ukraine, CIS countries. We stock a wide assortment of rolled metal of various grades of Steel, copper, brass, bronze, duralumin, aluminium, titanium. Wholesale and retail. Possible cutting.

Delivery throughout Ukraine.

Contact the company OOO "UNINTERSTING" You will be able to buy ferrous and stainless rolled in Dnepropetrovsk, Kharkov, Kiev, Odessa, Zaporozhye with delivery to Ukraine

Any carrier of products go to Kiev ,Mariupol, Makiyivka Uzhgorod Kovel,Novovolynsk, Vinogradov,Yellow,Manganese Korosten,Dnepropetrovsk,Pavlohrad, Dniprodzerzhynsk Water, Kryvyi Rih,Volyn ,Slavic, Moscow,Mukachevo, Svalyava

Berdyansk, Melitopol, Energodar, Kyiv, Brovary, Alexandria, Voznesens'k, Illichivs'k

Shipping is done as soon as possible, and the price the best on the market! Still have questions? Call us!

Flat rolled product of rectangular cross section of uniform thickness from 0.10 to 6.00 mm inclusively, supplied in rolls or cut to length (strip) with a cut edge. 3. sheet: Flat rolled product of rectangular cross section of uniform thickness: cold rolled - from 0.20 to 12.00 mm inclusively, supplied in segments with cut or rolled edge; hot - from 3.00 to 25.00 mm inclusively, supplied in segments. 4. plate: Flat rolled product of rectangular cross section of uniform thickness over 25,00 mm, supplied in segments. 5. camber: the Deviation from straightness, in which the surface of the side edge of the foil, ribbon or sheet in a horizontal plane has the shape of an arc. 6. deflection (warpage): Private view of the deviations from flatness in longitudinal or transverse direction, wherein the surface of the tape, sheet or plate has an arc shape. 7. cut end Squareness, mm: - compliance with the form in which the cutting plane forms with the longitudinal plane of the sheet or plate angle less than or greater than 90°. Width of cold rolled sheets and tolerances for the width depending on thickness shall be as specified in the table below: In millimetres