Bizator  /  Adverts  /  equipment and materials  /  industrial equipment  /  compressors, pumps, compressor equipment

valve CPC-125-2,5

Offer type: salePublished: 26.07.2018
Price:negotiated
Company:Torgovyij Dom 'KMZ'
Seller:Torgovyij Dom 'KMZ' Kristina Aleksandrovna
Phones:
Show phone
Write a message
Address:Mykolayivs'ka Oblast', Mykolayiv, Ukraine
THE INSPECTION AND REPAIR

Valves CTC for compressors subject to examination during routine maintenance (I) compressor, which should be complete disassembly of the valve and flushing details. Flushing of the valve parts may be made of any neutral liquid. Nagar more contaminated parts of the valve it is advisable to remove by washing in a solution labomed (TU 38907.47.001-90) when the concentration of the solution 40÷50 g/l and a temperature of 80÷90 °C. the holding Time is to fully degrease and remove carbon from parts of the valve. For more intensive cleaning of carbon to use hard, not a metal brush. Then the pieces wash in hot water and blow it with compressed air.

Disassembly of the valves of the CPC is performed by extracting the retaining strips of grooves to open the access plates and springs to assemble valve and again blow out with compressed air. All damaged items should be replaced with a new one from the zip. When you remove carbon from valve parts you must not use metal tools to damage details. If the details are traces of much wear and tear, such parts must be replaced.