The air hammers (Low Pressure Hammer) CIR76, CIR90, CIR110, CIR120, CIR130, CIR140, CIR150, CIR160, CIR170, CIR180, made in China
Offer type: salePublished: 20.07.2018
| Price: | negotiated |
| Company: | Krotimport |
| Seller: |  Andrej Andreevich |
| Phones: |  +38 097 682-47-85 Show phone |
| Address: | Ukraine, Dnipropetrovska Oblast', Kryvyi Rih |
We import and sell the following air hammers low pressure series: CIR Low Pressure DTH Hammer, made in China:
- CIR76 Hammer (diameter 76mm);
- CIR90 Hammer (diameter 90 mm);
- CIR110 Hammer (diameter 110mm);
- CIR130 Hammer (diameter 130mm);
- CIR150 Hammer (diameter 150mm);
- CIR170 Hammer (diameter 170mm);
- CIR200 Hammer (diameter 200mm).
To the above air hammers low pressure series: CIR Hammer, fit the next bits (drill bits):
- CIR76 Hammer (crown d = 76mm);
- Hammer CIR90 (crowns d = 90mm, 110mm, 120mm, 130mm);
- CIR110 Hammer (crowns d = 110mm, 120mm, 130mm, 140mm, 150mm, 160mm, 170mm);
- CIR130 Hammer (crowns d = 130mm, 140mm, 150mm, 160mm, 170mm, 180mm);
- CIR150 Hammer (crowns d = 150mm, 160mm, 170mm, 180mm, 200mm);
- CIR170 Hammer (crowns d = 170/175mm, 185mm, 200mm, 220mm, 250mm);
- CIR200 Hammer (crowns d = 250mm, 300mm, 350mm, 400mm, 450mm, 500mm).
The air hammers are submersible, series CIR76 - CIR200 Low Pressure DTH Hammer designed for drilling works at low air pressure (5 - 10 bar) and has the following features:
Big operational resource;
- High performance at low and medium pressure;
- A wide working pressure range from 5 to 10 bar, with high performance;
- Maintainability;
- Non-return valve to prevent ingress of slurry (water) in the air hammer;
Reliable spline coupling of the crown hydropercussion machine, with the locking finger;
- Working pressure 0,5 - 1,0 MPa, depending on the diameter of the hydropercussion machine;
- Air consumption 6 – 12 m3/min, depending on the diameter of the hydropercussion machine;
- Excellent replacement air hammers type P-155, P-130, P-110, P-105, P-85, P1-75, M48 and the like;
Pneumatic punchers series CIR76 - CIR200 Low Pressure DTH Hammer - great job with the drilling of wells with diameter from 76 mm to 500 mm, air pressure 5 to 10 bar. Used for drilling in an open and underground method in medium and hard rocks of the fortress, including abrasive shattered and fractured.
The connection of the hydropercussion machine with a crown – slotted latching finger. This connection allows you to easily change the crown without unscrewing the slotted nut.
Pneumatic punchers CIR series Low Pressure DTH Hammer - have built-in check valve, which is designed to prevent the ingress of slurry (water) from the well into the hydropercussion machine.
A distinctive feature of the air hammers CIR series Low Pressure DTH Hammer is a great service life, which is achieved due to good design, quality of machining of components and parts used in the manufacture of materials.
Pneumatic punchers CIR series Low Pressure DTH Hammer can be used for a wide range of drilling operations such as drilling water wells, blast holes, strengthening of foundations, tunnels and drilling for various construction needs.
We offer only quality products, great prices and convenient scheme of direct deliveries to any country of the former Soviet Union, including some from far abroad!!!
Contact phone: +38 097 682-47-85
