Ribbon brake ribbon . EM -1 . EM -2 -2 LAT .

Tape Tormaza tape . Em -1 EM -2 EM-To . LVL -2 . Used in brake and friction units of machines and mechanisms under dry friction, which require high temperature resistance and wear resistance. The tape brake EM-1 (Elastic material). Sanded, rolled, black brake band brake is applied in friction units of machines and mechanisms under dry friction with the friction surface temperature of 200°C. the Rolled material has a high elasticity, ability to use in the brake devices with different radius of curvature of the friction surface Comes tape width 40 — 160 mm, thickness 5 — 10 mm Tape brake EM-1 retains its performance properties in temperate, tropical and cold climates at temperatures down to -60°C Woven tape brake LAT-2. Asbestos, cloth, brake band, armirovanye brass wire, impregnated with an oil composition is Supplied to the tape width 40 — 200 mm, thickness 4-12ммЭто tape made of cloth and asbestos reinforced with brass wire and impregnated with oil. Used as lining in friction and brake units of machines and mechanisms under dry friction of metals. Tape width can be in the range from 13 to 200 mm, and a thickness in the range from 4 to 12 mm. Operational temperature limit brake band – plus 300 degrees Celsius, the maximum pressure which it can withstand – 5 MPa (50 bar). In addition, the tape LAT-2 has the following technical characteristics: density of 1.45 — 1.65 g/cm?; linear wear of not more than 0.11 mm; the coefficient of dry friction of 0.45 to 0.60 cast iron MF; when exposed to water and oil, the mass increase is not more than 12%; the resistance to bending. Brake tape LAT-2 is used in the friction of dry type.