Plasmart Powermax 85 Hypertherm (plasma cutting system)

Hypertherm Powermax 85— system premium for cutting material thickness up to 25 mm, the strength of the output current is 85A. The design of this system that is designed to maximize uptime and performance, embodied the latest technological developments, such as Smart Sense, which is allows you to automatically adjust the pressure of the gas. Due to a number the available configurations in which done Duramax torches, operators can to choose the tool that best suited for this job: hand cutting or gouging, automated cutting in portable version, cutting using coordinate table and robotic cutting or gouging. Characteristics: Input voltage: 380 / 400V (3-phase) 50~60 Hz. Input current (12,2 kW): 20.5 cm/19,5 A (380/400 V, 3 phases). Rated output voltage: 143 VDC. current. Voltage idle: 270 In the post. Current. Output current: 25~85 A. duty cycle (at 40°C): 60% when 85 And 100% at 66 A. gas Source: Clean dry, fat-free air or nitrogen. The recommended flow rate and pressure in the inlet gas. Cutting: 189 l/min @ 5,9 bar. Gouging: 212 l/min at 4.8 bar. Source type current: Inverter - IGBT (bipolar transistor with insulated gate). The length of the incoming power cable: 3 m Cutting (thickness / speed): recommended: 25 mm / 500 mm/min 32 mm / 250 mm/min. Limit (manual): 38 mm / 125 mm/min. Sizes with handles (Ghsiv): 500 mm x 234 mm x 455 mm Weight (with cutter 7.6 m): 28 kg. working Table, dimensions: 3500 mm / 1700 mm. Good condition. Worker connected. You can check the work. Detailed photos on request. Lacacia: Kiev. More information at: http://marketstan.all.biz http://marketstan.com.ua http://marketstan.com