OPTIturn TU 3008 G lathe metal lathe-cutting optimum Vario tokarnia verstat Optimum
Offer type: salePublished: 08.07.2020
| Price: | 108 331 UAH |
| Company: | Stanok.org - internet-magazin stankov |
| Seller: |  stanok.org stanok |
| Phones: |  +380981500024 Show phone |
| Address: | Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk |
Optimum TU 3008 G (optimum Tu 3008 g) lathe metal lathe-cutting .
Description Optimum TU 3008 G:
- Automatic longitudinal and cross! feed.
- Mechanic (manual transmission).
- Adjusting the speed of rotation of the spindle with the knobs on the front panel.
- Asynchronous motor.
- This lathe features ground and hardened spindle, which allowed the manufacturer to concentricity of less than 0,009 mm and runout of the Chuck less than 0.04 mm.
- Allows guaranteed to provide precision machining for a long service life — hardened cast iron frame with numerous ribs, ground prismatic guide and prudently set manufacturer — volute casing screw.
- If necessary, an emergency stop of the machine, conveniently located emergency stop button.
- Equipped with automatic longitudinal and cross feeding direction does not depend on the direction of rotation of the spindle.
- Division of limbs: transverse carriage of the caliper of 0.04, the upper carriage of the caliper is 0.01; the tailstock quill handwheel 0.02 mm.
- Metric and inch threads in wide range.
- The choice of feed rate and step cut thread handle (in the range).
- Left and right rotation of the spindle.
- A large spindle diameter is 38 mm.
- Tapered roller bearings of P5 quality.
- All guides can be adjusted by wedge strips.
Specifications Optimum TU 3008 G:
Электропитание380 V ~50ГцДвигатель1,1 cutnarski cone шпинделяМТ5Присоединительная surface шпинделяCamlock DIN ISO 702-2 Nr. 4Диаметр through hole шпинделя38 Maksimalna height of the holder резца25 mvista центров158 meganthropus расстояние720 mmdiameter treatment over станиной310 mmdiameter treatment over суппортом190 mm станины180 MASCOTA rotation шпинделя125, 165, 225, 300, 400, 530, 560, 750, 1050, 1400, 1800, 2400, about/minoritiesto ступеней12Ход upper carriage суппорта65 mhad the transverse carriage суппорта150 mertola подача0,085 — 0,832 mm/opopaea подача0,01 — 0,1 mm/step opredeli cut metric резьб0,2 — 3,5 mm/opredeli step резьб56 cut into inch — 8 threads per dimunutive taper tailstock rear tailstock rear babkent 3Перемещение бабки70 megabrite размеры1.525 x 705 x 575 Massa станка261 kgSupplied Optimum TU 3008 G:
- 3-jaw Chuck 160 mm.
- Resistant centers MT 3 and MT 5.
- A set of replacement gears for guitar.
- Kit maintenance tool.
- The user's manual.
On all equipment warranty 1 year, provide services for warranty and post-warranty service.
Go to lathes for metal
