Radiator with bottom feeding FTV type 22 Kermi
Offer type: salePublished: 23.07.2020
Price: | 14 500 RUR |
Company: | Kermi |
Seller: | Lyudmila Nikolaevna |
Phones:
| Write a message |
Address: | Russian Federation, Leningradskaya Oblast', Saint-Petersburg |
| |
Therm X2 Profil-Ventil (FTV) devices based on a profile of the panels has a built-in automatic thermostatic valve (thermostat), with bottom connection sockets located on the sides of the device, side walls and air outlet grille.
Type 22 – double-row on depth with two rows of the convective beading which is located between the panels and welded to each panel (2 – two panels, 2 two series of a beading between panel) to a depth of 100 mm.
Suitable for all heat sources: oil, gas or district heating, powered by solar energy or conventional heating.
This design meets the requirements of equipment maximum use of the heat of combustion.
Scope of delivery:
• Radiators Therm X2 Profil with fixing plates. The surface is painted by powder coating with pre-primer.
• Top and side screens other than Type 10 (removable for cleaning).
• Corner console, strut, mounts, vent cover, free of charge, plugs installed.
Additionally, valve radiator:
• The valve is factory configured to a predetermined thermal capacity with pre-established indicators kv
• Plugs and air vent is installed and sealed.
Mount:
The mount is on the back of the heat sink using 4 mounting plates, and since the mounting length 1800 mm - with 6.
You can align the radiator horizontally and vertically.
Important: for radiators in height 200 mm - mounting package are not included and must be ordered separately.
Varnishing:
Profile compact radiators of firm "Kermi" have a sparkling two-layer lacquer coating. Their surface is degreased, treated with iron phosphate, primed with cathodic varnish by the method of cataphoresis dip and powder coating to DIN 55900-FWA7.
Standard finish: colour white(similar to RAL 9016). Color varnishing according to customer's request.
Packing:
Ready-to-install product is Packed in cardboard and covered with film. For installation remove the packaging not required.
Connections:
Male thread 2 x G 3/4”, standard
the connection on the right, on request
the connection on the left, without extra charge,
inner thread 3 x G 1/2” on the side.
Quality guarantee:
All radiators are tested for leaks.
Test pressure: 13,0 bar
Working pressure: 10,0 bar
Glasno certified DIN EN ISO 9001:2000. The performance complies with the requirements BAGUV, with the exception of radiators, type 10.
Attention:
This warranty applies only to the radiators are installed in closed heating system.