MOS-2

Sell constantly chipping hammer MOS-2 production Tomsk plant Kuznetsova.
chipping hammer MOS-2
Impact energy, j 39
Rate, beats/sec 22,5
Air consumption, l/min 1350
Pressure, ATM 5
Weight, kg 7,4
________________
Jackhammers produced in Russia, according to existing Standards and specifications. In the bumper hammers missing parts produced in China.

The letter jackhammer "MOS" is a registered trademark, protected by Russian law.
------------------------------------------------------------------------------------------------------------------------------------
For normal operation of pneumatic tools necessary air compressor with a certain capacity and pressure. According to the passport data of the manufacturer, a jackhammer or betonolom operates on compressed air pressure of from 0.3 to 0.5 MPa (approximately corresponds to a pressure of 3-5 3-5 atmospheres or bar or 44-74 psi (psi). Connection to air line with a working pressure of more than 0.5 MPa may cause premature failure of this pneumatic tool. Use an air compressor lower performance than necessary chipping hammer, air hose (hose) more than 10 meters long, with an inner diameter of less than 16mm, leads to loss of power pneumatic tools and as a consequence of the loss of productivity. From practical experience it is known that a jackhammer MOS-2 or m-2 starts steadily, but not at full strength, to work from a compressor capacity of 550 liters per minute, pressure of 0.5 MPa (compressor K-24 or similar).

When the ambient temperature is from about -5 to +5 degrees Celsius, the breaker can operate intermittently as a result of the freezing barrel and its internal channels. Utorevenue a jackhammer in a fire or using a blowtorch is strictly prohibited, as it leads to changes in the metal structure.

Violation of these rules leads to premature failure of pneumatic tools, and improper use does not involve the carrying out of WARRANTY REPAIR.