Electrochemical machine. Technology ECF

DIMET-M offers a new model of electrochemical machine ECF-A1 for manufacturing subject cavities of dies, molds, tools, geometrically-complex parts, which are a machine of the third generation towards the machines ES 4000 and ES 80. Main technical characteristics of the machine ECF-A1: The dimensions of the working surface of a table, mm - 400h320 The dimensions of the working area for placement of the electrode-tool and the workpiece, mm - HH Attainable treatment area, cm2 - 120 Achievable machining accuracy on the lateral surfaces, mm - 0,01, with almost complete reflection of the shape of the electrode on the end surfaces Achievable setting the surface roughness Ra, µm - 0,16 The linear range of the dissolution rate on operating modes, mm/min 0.1 to 0.4 Achievable performance, mm3/min - 2400 The amount of vertical travel of table, mm, not less than 160 Table feed, mm/min: working - 0,01-5, fast - 240 The maximum amplitude value of technological power, And not more than 8000 Power consumption depending on the treatment area, kVA, - 9-50 Overall dimensions of the machine, mm - HH. Electrochemical processing has several advantages compared to electrical discharge machining: - performance process ten times higher; treated surfaces do not have the defect layer; -there is no wear of the electrode-tool; electrochemical processing involves performing finishing operations with high quality and accuracy of processing, no finishing operations is not required; in some cases, electrochemical processing is able to solve problems of unsustainable for EDM processing. The area of effective application of technology of electrochemical shaping: The production will be subject cavities of dies, moulds, die casting moulds in the manufacture of: - all kinds of accessories: clothing, footwear, leather goods, furniture, cars, for the army, Navy; - jewelry, coins, medals, decorations, trinkets, jewelry, items of Church themes; tool: fitter, medical, domestic cutting, Cutlery; - articles of glass, crystal, ceramics, plastics, rubber products: tableware, lamps, containers for medical and perfume industry, Souvenirs, toys, consumer goods; moulds for the production of confectionery products, medical preparations. Manufacture of percussion and rolling tool, special tool, stamps. Fabrication of geometrically-complex machine parts. The production of parts made of difficult-traditional materials. Repair and recovery tools. Sell electrochemical machine ES 4000 after cap. repair, or replaceable with an additional charge for machine ES 4000 requiring major repairs. Buy electrochemical machines ES 4000 used. More detail on the website: http://www.stanok.dimetm.ru