Pumps borehole/depth (made in Italy)
Offer type: salePublished: 27.02.2015
| Price: | 3 250 UAH |
| Company: | TOV "AKVAPROM" |
| Seller: |  Leonid |
| Phones: |  (097) 389-10-72 Show phone |
| Address: | Ukraine, Zhytomyrs'ka Oblast', Zhytomyr |
Submersible motors NWS4 4" is rewindable motors that are suitable for wells Max. temperature of 30 ° C and the pH is between 6.5 and 8.0.
The filling liquid is non-toxic dielectric fluid that is approved by the FDA (Directorate for sanitary inspection behind quality of foodstuff and medicines), as well as other institutions pharmacology worldwide.
The connecting flange dimensions conform to NEMA standards 4 ", as these submersible motors are designed to drive 4 " submersible pumps.
Usually submersible motors are mounted vertically. However, the engines can be mounted horizontally under the condition inspection for each specific application.
4 "submersible motors can be installed in the borehole to 150 m
The ability to scroll is provided by a design that allows easy disassembly and Assembly of engines.
Product benefits:
The stator of the motor is non-toxic dielectric oil environment.
- Material cable meets the requirements for drinking water.
- Shaft seal ensures high performance.
- High efficiency electrical design reduces operating costs.
- All motors prefilled and tested.
STANDARD SPECIFICATIONS:
Power: 0.37 to 7.5 kW
The flange NEMA 4 "
Degree of protection: IP 68
The number of starts per hour: 30
Installation: vertical / horizontal
Standard voltage: 220-230 V/50 Hz;
380-415V/50 Hz,
460 V / 60 Hz.
Allowable voltage fluctuation: ± 10% single Phase: PSC type
Rated ambient temperature: 30 ° C Cooling flow: min 8 cm / sec
Water PH :6.5-8
Thrust Rating: N 1500 N 2500, 4500 N (K)
Rates vary depending on the settings of the pumps.
Will select the desired pump - please!!!
The filling liquid is non-toxic dielectric fluid that is approved by the FDA (Directorate for sanitary inspection behind quality of foodstuff and medicines), as well as other institutions pharmacology worldwide.
The connecting flange dimensions conform to NEMA standards 4 ", as these submersible motors are designed to drive 4 " submersible pumps.
Usually submersible motors are mounted vertically. However, the engines can be mounted horizontally under the condition inspection for each specific application.
4 "submersible motors can be installed in the borehole to 150 m
The ability to scroll is provided by a design that allows easy disassembly and Assembly of engines.
Product benefits:
The stator of the motor is non-toxic dielectric oil environment.
- Material cable meets the requirements for drinking water.
- Shaft seal ensures high performance.
- High efficiency electrical design reduces operating costs.
- All motors prefilled and tested.
STANDARD SPECIFICATIONS:
Power: 0.37 to 7.5 kW
The flange NEMA 4 "
Degree of protection: IP 68
The number of starts per hour: 30
Installation: vertical / horizontal
Standard voltage: 220-230 V/50 Hz;
380-415V/50 Hz,
460 V / 60 Hz.
Allowable voltage fluctuation: ± 10% single Phase: PSC type
Rated ambient temperature: 30 ° C Cooling flow: min 8 cm / sec
Water PH :6.5-8
Thrust Rating: N 1500 N 2500, 4500 N (K)
Rates vary depending on the settings of the pumps.
Will select the desired pump - please!!!
