The bevel of the pipe
| Price: | negotiated |
| Company: | OOO 'Inzhenernoe predpriyatie 'RUT' |
| Seller: |  Ivanov Aleksej Vladimirovich |
| Phones: |  +38(056)320940 Show phone |
| Address: | Ukraine, Dnipropetrovska Oblast', Dnipropetrovsk |
UNIT FE PRO 10
Applies during installation when assembling pipelines, repairs, etc. as Possible and pneumatic electrical design.
Unit designed to handle the end of the pipe chamfering pipe-beveling, the chamfer) or calibration tubes primarily for tubing preparation before the welding operations. Operation facing and chamfering can be performed serially or simultaneously.
When replacing Cams and blocks, it is possible to mount the unit on the pipe diameter from 40 mm to 273 mm with wall thickness up to 20 mm, with this Assembly it is possible to prepare these sizes of pipes for welding.
Manual the control allows for precise mounting on pipes.
Processed materials - carbon steel, chrome steel (max Rc35), stainless steel, aluminum alloys and Nickel without restrictions.
Characteristics of FE PRO 10:
The actuator
• the actuator is 1.5 kW;
• nominal pressure to 0.63 MPa;
• air consumption - 1750 N1/min;
• speed rotation - 8-15 rpm;
• range the processed pipe - 40-270 mm;
• the maximum wall thickness - 15 mm;
• weight units: 31.5 kg
The drive
• the actuator is 1.8 kW;
• consumption - 220 V / 50 Hz;
• speed rotation - 14...32 rpm;
• range the processed pipe - 40-270 mm;
• the maximum wall thickness - 15 mm;
• weight unit - 40,00 kg
Materials processed:
• carbon steel;
• chrome steel (max Rc35);
• stainless steel;
• alloys aluminum;
• Nickel without restrictions.
