Band saws

BAND SAWS WIKUS

Tape saw WIKUS are of the highest accuracy and performance. Consumers around the world trust our "smart" the technologies. Worldwide clients WIKUS benefit from using the services of our extensive service and technical service support. Right in the workplace we will help You with the choice band saws WIKUS and the optimum cutting parameters. We want to use our high-tech You were able to achieve maximum results. Use the cooperation with WIKUS. With us You will achieve high precision cutting.

We are able to offer You:

• Band saw blades are made of tool steel
• Bimetal band saws
• Band saws carbide
• Band saws with diamond coating

 

BAND SAW BLADES ARE MADE OF TOOL STEEL

Band saws of tool steel WIKUS is designed primarily for cutting free-cutting materials from steel to composites.

Tempered the cutting portion of the tooth, in combination with elastic blade ensures high reliability of the instrument.

Form contents: Bay of desired length and Bay factory packaging with the length of the tape up to 120 m, depending on the width or welded in size band saws

The width of the blade: from 5 to 25 mm

Constant step tooth: from 3 to 24 teeth per inch (tpi)

Form tooth: L, S, K

Types wiring: SD, WS, GS

 

BIMETAL BAND SAW CUTTING MARKS MATERIAL

M42

Mark high speed steel M42 distinguished by high wear resistance. It is caused the structure of steel, after which the improvement is a heat-resistant martensite with the inclusion of a spheroidal carbides. Thanks to the technically modern heat treatment provides the optimum size of carbides and their uniform distribution in the structure.

X3000

New generation of cutting materials from WIKUS was designed specifically for cutting tagaloamatua materials: heat-treated steel with a high strength characteristics, corrosion-resistant steels and alloys Nickel-based. Mark X3000 characterized by extremely high hardness and the increased viscosity. This combination of properties is possible thanks to the use of new, developed by specialists of WIKUS heat treatment.

Form contents: Bay of desired length and Bay factory packaging with a length of ribbon to 120 m, depending on width or welded in size band saws

Width saws: from 6 to 100 mm

Variable pitch tooth: from 0,7 - 1,0 12 - 16 tpi

Form tooth: S P, K, HV, VA

Types wiring: SD, GS

Material cutting part: HSS-M42: 68 - 69 HRC, OK. 940 - 1000 HV

X3000: OK. 70 HRC, about 1000 HV

Special version: PW, PE

 

BAND SAWS CARBIDE

Band saws carbide WIKUS have specially the sharpened teeth of trapezoidal shape with bussing. Used hard alloys with different hardness and structure provide optimal the result in each case of application. High quality material of the canvas-the basics provides long service life and the highest performance of our tool premium.

 

 

Form contents: Bay with a Max. length of the tape 50 m or welded in size tape saws

Width saws: from 13 to 125 mm

Constant step tooth: from 1.25 to 4 teeth per inch (tpi)

Variable pitch tooth: from 0,7 - 1,0 up to 3 - 4 tpi

Form tooth: S K, T, TSN

Special version: PW

 

 

 

BAND SAWS WITH DIAMOND COATING

Being the hardest tool, diamond can cutting any materials and alloys. Properties specially developed for WIKUS material canvas-the basics is designed to withstand loads arising from extremely high cutting speeds. Band saws with diamond coating WIKUS have seven standard sizes of grains: D91, D126, D181, D252, D356, D427, D601 Other sizes outside the production program, as well as the canvas is the basis for the execution of the VA can be supplied on request. The use of band saws with diamond the floor is very DIAGRIT specific, therefore we recommend to consult at our specialists to Refine the grain size and dimensions of the strip of fabric.

 

Form contents: boiled in size band saws

Width saws: from 10 to 100 mm

Diamond coverage: continuous (K), segmented (S), intermittent (U) for drinking increments from 6 to 30 mm

Size grain: D91, D126, D181, D252, D356, D427, D601