Thermometer TMP-100C gauge showing signaling

TDM-100C is designed for temperature measurement due to a change in pressure in the bulb.

Thermometers TMP-100S can work with liquids and gases.

The manometric thermometers TMP-100S have the ability to manage external electrical circuits with signaling devices, installed on the thermometer.

The advantage of this type thermometers is the ability to take temperature readings without the use of additional equipment. Structurally, thermometers showing TEMPS consist of a cylinder, connecting capillary and pressure gauge in which applied temperature scale, graded according to the testimony of the of the sensor.

Thermometers signaling TDM-100C can commute outside line with the following parameters: 220V or 380 V for alternating current with frequency of 50 Hz or 220V - chain DC. The contacts have a breaking capacity of 30 VA. The device has a group of contacts to control external devices, from which one normally open and one normally closed.

Thermometers of this series are made of copper alloy case material - plastic, glass, acrylic. Diameter the body of the thermometer is 100 mm Degree of protection device - IP40.
Devices in this series have accuracy class of 1.5.

With regard to structural features. The length of the bulb this thermometer is 160 mm In this case, the diameter of the bulb - 14 mm, Connection is made with the help thread MH. Long connecting capillary may vary. Standard lengths are as follows: 2.5 m; 4m; 6m; 10m; 16m.
The measuring ranges of the following temperatures: from 0 to 120 degrees, from 0 to 150 degrees, from 0 to 200 degrees, from 0 to 300 degrees and from 0 to 400 degrees.