Electric pipe and tube Bender REMS Curvo

Semi-hard, hard, soft copper pipe: ∅10-35 mm, ø ⅜ -1⅜"; Thin-walled pipes and tubes in the shell: ∅10-18 mm; Pipe press fitting systems made of stainless steel ∅12-28 mm, high carbon steel, shell and without: ∅12-28 mm Precision mild steel pipe: ∅10-28 mm; Steel pipe according to DIN 2440: ∅¼-¾"; Insulating pipes DIN EN 50086: ø 16-32 mm; Plastic pipe: ∅14-40 mm;

Versatile and compact tool for cold bending up to 180°, without Vice. For construction sites and workshops.

REMS Curvo - quality, flexible for various types of pipes, without preliminary settings. Fast or slow feed for the perfect flexible. Quick change nozzles.

 

Universal application

• In the sanitary and heating systems, climate control, refrigeration, hydraulics;
• For heating pipes, including thin-walled;
• For pipes of the pressfitting systems.

System advantage

The same segments for models

Savings

After a few bends of the Bender pays for itself in savings account fittings. Material savings for soldering and working time, increased the reliability.

Design

• Easy, fast and compact (weighs only 8 kg);
• Fast feed, slow speed for precise bending;
• Mobile stand with adjustable height.

The bending formers and back formers

• Quick-change segments, stops for different materials, diameters and bending radii;
• Marking on each stop and the scale from 0° to 180° (in each segment);
• The material is glass fibre reinforced polyamide.

Drive

• Gearbox with slipper clutch;
• Universal motor 1000 W, the right and left turn;
• Electronic stepless jog switch, fast feed, slow stroke.

Lubricants for flexible

Use REMS Aerosol for the formation of the oil film for reduction of energy consumption and uniform bend. Does not contain acids, harmless to the environment.

 

Delivery

REMS Curvo Set electric pipe and tube Bender.

• For the following types of pipes: Semi-hard, hard, soft copper ∅10-35 mm, ø ⅜ -1⅜", thin-walled and in the shell ∅10-18 mm, systems press-fitting stainless steel ∅12-28 mm, from high-carbon steel shell and without: ∅12-28 mm, precision mild steel ∅10-28 mm, the steel according to DIN 2440 ∅¼-¾", electrical insulation according to DIN EN 50086: ø 16-32 mm, plastic ∅14-40 mm;
• Electric actuator with gear and slipper to protect the clutch;
• Universal motor 230 V, 50-60 Hz, 1000 watts, left and right move the bolt;
• Comes in a sturdy steel case.