Electric pipe and tube Bender REMS Akku-Curvo

Semi-hard, hard, soft copper pipe: ∅10-28 mm, ø ⅜ -1⅛"; Thin-walled pipes and tubes in the shell: ∅10-18 mm; Pipe press fitting systems made of stainless steel ∅12-28 mm, high carbon steel, shell and without: ∅12-28 mm Precision mild steel pipe: ∅10-28 mm; Steel pipe according to DIN 2440: ∅¼-½"; Insulating pipes DIN EN 50086: ø 16-25 mm; Plastic pipe: ∅14-32 mm;

Versatile and compact tool for cold bending up to 180°, without Vice. For construction sites and workshops.

REMS Akku-Curvo - quality, flexible for various types of pipes, without preliminary settings. Fast or slow feed for the perfect flexible. Quick change nozzles.

Universal application

• In the sanitary and heating systems, climate control, refrigeration, hydraulics;
• For heating pipes, including thin-walled;
• For pipes of the pressfitting systems;
• Not network dependent.

 

Savings

 

After a few bends of the Bender pays off significantly due to saving fittings. Also saves time and materials for soldering, increased reliability.

Design

• Convenient patented tool for flexible pipes;
• Very lightweight (only 8.6 kg), practical arm;
• Instantly ready to use, without the prior settings;
• Flexible angle in ° ∅ in just 7 seconds!
• Fast and slow speed with emergency stop;
• Mobile stand with height adjustment.

The bending formers and back formers

• Quick change of the bending formers and back formers for different materials, diameters and bending radii;
• Marking on each stop and the scale from 0° to 180° on each segment;
• The material is glass fibre reinforced polyamide.

For more detailed information, see "bending formers and back formers"

Drive

• Gear with the clutch does not require maintenance;
• Battery motor 18 In with a strong thrust, large reserve power, 500 W output;
• Stepless switch and the possibility of emergency stop.

Technology Li-Ion

Powerful lithium-ion battery 18 V, capacity 2,6 Ah, long work on a single charge, large capacity, large reserve. 40% lighter and 30% higher capacity compared to Ni-Cd technology. Bistrosavage the device (1 hour) with no memory effect.

Lubricants for flexible

Use REMS Aerosol for the formation of the oil film for reduction of energy consumption and uniform bend. Does not contain acids, harmless to the environment.

 

Delivery

• For the following types of pipes: semi-hard, hard, soft copper: ∅10-28 mm, ø ⅜ -1⅛", thin-walled and in the shell: ∅10-18 mm, systems press-fitting stainless steel ∅12-28 mm, from high-carbon steel shell and without: ∅12-28 mm, precision mild steel: ∅10-28 mm, the steel according to DIN 2440: ∅ ¼ - ½ " insulating DIN EN 50086: ø 16-25 mm, metal: ∅14-32 mm;
• The drive gear with slipping clutch, battery, engine strong thrust, stepless electronic switch and emergency stop;
• Lithium-ion (Li-ion) battery, 18 V, 2.6 a/h, rapid charger Li-Ion/Ni-Cd 230 V, 50-60 Hz, 65 W;
• Bolt, segments, formers;
• Comes in a sturdy steel case.