Brass car 63, LS - 1 sheet, strip, tube, tape

Sell Chupa Territorially specialises in the wholesale supply of rolled metal products and offers its customers a wide range of products made of ferrous metal, stainless steel, special steels.
Alex
in a wide range of products made of brass: brass profile, sheet, strip, tube, strip, wire, plate, ingot, rod.
The main difference between brass and, accordingly, brass rolled copper is higher strength and resistance to corrosion. High corrosion resistance manifests itself in the air, many organic acids and carbon dioxide solutions in sea water.
Kinds of brass alloys
Brass alloys are two-component and multicomponent or special. The first is denoted by the letter L and the digit that indicates the percentage content of copper in the alloy. Depending on ancillary items brass gets and the corresponding name: iron - manganese, silicon and aluminum-Nickel.
Multicomponent brass - represent a complex type brass rolling. Lead, tin, Nickel, aluminum, manganese, iron can be used as an alloying agent. All of these additional components add to improve the mechanical characteristics and properties of the metal. Marked such alloys are several letters, which are dependent on the number of incoming chemical elements in brass. Numbers indicate the percentage of each metal contained in the alloy.
Main features
Brass car has good processing properties, it can be used when you want to light alloy machinability and formability.
Adding aluminum and zinc, the alloy is resistant to atmospheric corrosion. Adding lead to exposure to sea water. When machining brass with the addition of lead to 3% by cutting, brass shavings becomes brittle. This alloy is used when it is necessary to achieve a fairly high degree of surface cleanliness. Iron and Nickel increases the strength properties of the alloy.
Properties of brass:
High turnover - allows you to get a good casting.
Excellent warp - allows the use in the production of rolled semi-finished products.
Use at low temperatures.
Scope
Due to its valuable properties of products made of brass are used in various industrial sectors: mechanical engineering, automotive, aerospace and shipbuilding, engineering, plumbing industry. In the car and watch industry used alloy of lead and brass.
Brass car is also used for the manufacture of musical instruments (cymbals, drums, brass pipe). When the production of deep drawing (bullets, shells), used weapons-grade brass.
A wide range of products is produced from brass rolling:
Electromechanical assemblies;
corrosion-resistant parts of ships, aircraft;
printing matrix;
details of chemical equipment;
the armature;
manometric and condenser tubes, bolts, gears, bushings, bearings, nuts and nut adjusting screws, worm screws.
The company offers a look at our product range brass.
No.
Name
Brand
Size, mm
GOST, TU
the strata. (diameter)
1
Tape
63
0.1 - 2.0
2208
2
Sheet
63
0.5 - 150.0
2208
3
Wire
63, LS - 1
0.5 - 5.0
1066; 12920
4
Rods
63
4.0 - 160.0
2060
5
Pipe
63 ; L
10.0 - 50.0
494
6
Pipe
L
16* 1,19 *1
21646
7
Tape
L
0.08-2.0
2208
8
Sheet
L
0.5-150.0
2208
9
Tape
90
0.08-2.0
2208
10
Sheet
90
0.5-150.0
2208
11
Sheet
LS - 1
0.5 - 25.0
931
12
Rods
LS - 1
4.0 - 160.0
2060